Pioneer SBX-N500, Руководство по эксплуатации

Страница: 39 / 68

Basic operations 39
En
Basic oper
ations
3
Listening to the audio of the
unit with a Bluetooth receiver
1. Switch a paired
Bluetooth
receiver to
the connection standby state.
For how to switch to the connection standby
state, see the operating instructions for
your
Bluetooth device.
2. Turn the power of the unit on.
The unit connects to the Bluetooth receiver
automatically and the audio of the unit is
played from the
Bluetooth receiver.
However, if BT Audio is selected, you will not
be able to listen to sound with the
Bluetooth
receiver.
Note
• Control the volume and sound quality of the
unit and the
Bluetooth receiver from each of the
devices.
• The audio played from the Bluetooth receiver will
have a delay when compared to the audio from the
unit.
Disabling the BT Transmitter
function
1. Press SETUP.
The Initial Setup screen is displayed.
2. Set [Bluetooth] d [BT Transmitter] to
[Off].
Note
• The unit does not support the Mono Headset
Profile (Hands Free Profile).
• Only one Bluetooth device can be connected to the
unit at one time. Connection with multiple devices
is not possible.
• The Bluetooth function may not be available for
certain Bluetooth device types.
• The audio may sound choppy if signals from other
devices interfere with the connection.
• The Bluetooth connection will be lost if a
malfunction occurs due to the effect of a device
that operates in the same frequency, such as a
medical device, microwave, or wireless LAN device.
• Even if the unit is within 10 meters of the Bluetooth
device, a connection may not be established if
objects are in between.
• If communication is cut off because of objects
between the
Bluetooth device and the unit, the
Bluetooth connection will be lost.
• Large distances between the Bluetooth device and
the unit will result in poorer sound quality, and the
connection will be cut off if the distance between
the
Bluetooth device and the unit exceeds the
operating range.
• The connection with the Bluetooth device will be
cut off when the power for the unit is turned off
or when the distance from the
Bluetooth device
exceeds 10 meters.
72-MCS838-EU0B2_En.indd 39 2013/09/05 11:57:00