Connect network
08
26
E: Setting the wireless LAN setting for
this unit from the web browser of a
computer that supports a wired LAN
connection
• When wireless LAN is set once, the following procedures
1 through 3 must be executed.
1
Select “Network Type Set” from the HOME
MENU.
2
Use
/
to select “Wired”.
3
Press ENTER.
The home menu will be disabled for about 60 seconds. After
60 seconds, execute the following operation.
4
Turn off power to the unit.
If a LAN cable is connected to the unit, disconnect the LAN
cable from the unit.
5
Use a LAN cable to connect the unit to the
computer.
6
Press
STANDBY/ON.
Wait for about 30 to 40 seconds.
7
Wait for the NETWORK indicator to change
from flashing to steadily lighted red.
This may require up to 90 seconds or so.
8
When the NETWORK indicator lights red,
start your computer’s Web browser, and access
the URL noted below to make settings for this
unit.
The Web Control menu will appear.
9
From the menu on the left, select “Network
Configuration”.
If you wish to change the Friendly Name, select “Friendly
Name” from the menu and change the name before selecting
“Network Configuration”.
http://169.254.1.1
SBX-B70D.book 26 ページ ２０１５年４月１３日 月曜日 午後２時６分
