Installing and connecting the unit
03
10
Chapter 3:
Installing and connecting the unit
Before connecting the unit or changing the connections, be
sure to turn off the power and disconnect the power cord from
the outlet. Also, make sure you have finished connecting all
cables before connecting the power cord to the wall outlet.
Installing the unit
If you are placing the unit directly under a TV, only place a TV
of
40 kg
or less within the allowable placement area.
CAUTION
• Do not place a TV stand on top that is larger than the
possible placement area.
• Do not install the unit in an unstable place such as on an
unsteady stand or tilted surface. The unit may fall or tip
over, resulting in injury.
• The unit is not magnetically shielded and so should be
used away from a cathode ray tube (CRT) TV or monitor.
Also, do not place devices that are easily influenced by
magnetism (magnetic cards, watches, video tapes, etc.)
near the unit.
• Do not attach this unit to the wall or ceiling. It may fall off
and cause injury.
1
Place the unit.
CAUTION
• There are subwoofers located on the bottom of the unit.
Make sure that there is nothing between the unit and the
surface it is being placed on it.
• Place the unit so that it does not extend out over the TV
rack, shelf etc.
Dotted range : Possible placement area
660 mm
310 mm
Subwoofer
SBX-B70D.book 10 ページ 2015年4月13日 月曜日 午後2時6分