Pioneer S-BD707T, Руководство по эксплуатации

Страница: 31 / 400

3 System Setting
System Setting 31
S
ys
tem Se
tting
3
Settings
Adjust the Setup Settings
You can change the settings of the player in the
[Setup] menu.
1. Press HOME MENU (
n ).
2. Use A/D to select the [Setup] and press ENTER
( b ). The [Setup] menu appears.
3. Use W/S to select the first setup option, and
press D to move to the second level.
4. Use
W/S
to select a second setup option, and
press ENTER ( b ) to move to the third level.
5. Use
W/S
to select a desired setting, and press
ENTER ( b ) to confirm your selection.
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to your TV
type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
, ,
Note
HB916-DH0_BDEUPPK_ENG.indd 31 2011-05-12 �� 12:22:21