203
2
Click the [Metronome] button
The [Metronome] button lights up and the sound starts.
3
Click the [Metronome Volume] button
to adjust the volume
The metronome volume can be adjusted by three levels.
5.9.2
SEQUENCE LOAD (Loading a sequence to a deck)
1
Click the SEQUENSER section (GUI) and drag & drop it to a deck.
The sequence is loaded to the
deck with a track name of “PATTERN**”.
To set the whole sequence as a LOOP and automatically start its loop playback:
Open [Preferences] > [Controller] > [Sequencer] and tick [Sequence Load: Set a LOOP and
automatically playback]
In the SEQUENCE LOAD, the sequence track will be created when the marker on the
sequence beat counter reaches the right edge. If the recorded sequence is not
correctly loaded, playback the sequence until the marker reaches the right edge and
load it again.
5.9.3
SEQUENCE CALL
You can call and play up to 8 sequences directly with pads.
1
Switch to PAD MODE2
Содержание REKORDBOX
Страница 1: ...rekordbox TM Operating Instructions ...