Pioneer PDP4350SX, Руководство по обслуживанию

Страница: 92 / 217

PDP-5050SX
92
1 2 3 4
1 2 3 4
C
D
F
A
B
E
6.
ADJUSTMENT
6.1 POSSIBLE CASES WHERE READJUSTMENT IS REQUIRED
1. At shipment, the unit is adjusted to its best conditions. Normally, it is not necessary to readjust even if an assembly is replaced. If the
adjustment is shifted or if it becomes necessary to readjust because of part replacement, etc., perform the adjustment as described below.
2. Any value changed in Service/Factory mode will be stored in memory as soon as it is changed. Before readjustment, take note of the
original values for reference in case you need to restore the original settings.
3. Use a stable AC power supply.
43 (50) Y DRIVE Assy No adjustment required
PANEL POWER SUPPLY Unit No adjustment required
MR POWER SUPPLY Unit No adjustment required
DIGITAL VIDEO Assy
Writing of backup data is required.
Refer to the "7.1.6 BACKUP WHEN THE MAIN UNIT IS
ADJUSTED. "
43 (50) X DRIVE Assy No adjustment required
Other assemblies No adjustment required
Service Panel Refer to the "6.9 METHOD FOR REPLACING THE
SERVICE PANEL ASSY. "
When any of the following assemblies is replaced
AV BOARD Assy No adjustment required
MAIN BOARD Assy No adjustment required
However, HOST ID is changed. Please tell a customer about new HOST ID.
Refer to the following note and instruction manual.
TUNER Board Assy No adjustment required