Quick Start Installation Instructions
Page 9
Connect the System Cable to the Plasma Display (PDP-501HD).
Rear side of the Plasma Display (PDP-501HD)
NOTE:
DO NOT plug in the Power Cable before all other cables are connected to the units.
USE 100VAC ONLY
Use separately packaged
step-down transformer to
convert 220-240V to 100V
Tighten screws
after connecting
Remember to connect
the GND cable
Connectors from Left to Right:
A
) to Right Speaker Terminals
(tied black and red cables)
B
) to 15pin D-Sub Video 2 Output
C
) Ground (GND)
D
) to 8pin DIN Control Output
E
) to 4pin DIN Video 1 Output
F
) to Left Speaker Terminals
(tied black and white cables)
A
B
C
D
E
F
Please refer to the drawing to locate correct terminals.
