Quick Start Installation Instructions
Page 8
7. W
IRING
D
IAGRAM
The wiring instructions for the Media Receiver, Plasma Display and the Speakers are
shown below:
Connect the System Cable to the Media Receiver (PDP-501R). Then, connect the short
Speaker Cable to the Media Receiver.
NOTE:
DO NOT plug in the Power Cable before all other cables are connected to the units.
Rear Side of the Media Receiver (PDP-501R)
USE 100VAC ONLY
Use separately packaged
step-down transformer to
convert 220-240V to 100V
Remember to connect
the GND cable
Connectors from Left to Right:
A
) to 8pin DIN Control Output
B
) to 4pin DIN Video 1 Output
C
) to 15pin D-Sub Video 2 Output
D
) Ground (GND)
E
) to Left Speaker Terminals
(tied black and white cables)
F
) to Right Speaker Terminals
(tied black and red cables)
A
B
C
D
E
F
Tighten screws
after connecting
