PDP-434CMX
64
1
2
3
4
1
2
3
4
C
D
F
A
B
E
6.3 HOW TO ENTER FACTORY MODE
For adjustments, it is necessary to enter Service/Factory mode. There are two ways to enter Service/Factory mode: by using
the remote control unit, or by using RS232C commands from your PC.
When the unit is in Standby (STB) Mode
When the power is on
No.
Method
Procedures
1
Remote
control unit
When the conventional Service/Factory code (AA5F) is sent, the unit will enter Service/Factory mode.
2
PC
Connect your PC via its RS232C port, and send the FAY command.
• Please refer to the technical document (Service Knowhow)