Pioneer PDP-425MX, Руководство по обслуживанию

Страница: 25 / 61

PDP-425MX
25
5 6 7 8
5 6
7
8
C
D
F
A
B
E
5.4 Timing mode and pattern for the auto white balance function
5.5 Description of Adjustment Item
Item Description Adjustment Range
HX_1_0_BASIC_JP Current F/W Version
ervice factory Mode
PUT3
Service factory Mode with INPUT3
uto White Balance
Execute the gains and biases adjustment for R/G/B
three Channels in ADC device
Enable/Disable
itial EEPROM Execute the initial setting of EEPROM device Yes/No
olor Temperature Change the color temperature setting value.
Low/Middle-Low/Middle
/Middle-High/High
-GAIN Gain value for Red Channel of ADC device 0~512
-GAIN Gain value for Green Channel of ADC device 0~512
GAIN Gain value for Blue Channel of ADC device 0~512
-BIAS Black level for Red Channel of ADC device 0~512
-BIAS Black level for Green Channel of ADC device 0~512
BIAS Black level for Blue Channel of ADC device 0~512
Timing Mode : 720 x483 @ 59.94 Hz (483p)
Test Pattern : SMPTE COLOR BAR
6 To leave service factory mode:
Press the "VOL - (
A
) " and "RIGHT+ (
B
)" two keys again in the key pad simultaneously and current system working mode is in the serv
factory mode, the system will leave the service factory mode and do the service factory preset function, after that, the system will
back to normal operation mode. (See Fig.6)
5.3 Key command
Rem Code Key Name Key Pad Function Remarks
AA56 INPUT 3 INPUT/SET Choose the input to input Source 3 For basic model
AAD3+AF7B INPUT 5 INPUT/SET Choose the input to input Source 5 For custom model
AA8A SET MENU Function Set
AA8B MENU MENU Open/Close the MENU
AA96 RIGHT+ Select the upper item
AA95 VOL + Execute the function
AA94 VOL- Execute the function
AA97 RIGHT- Select the lower item
AA1C STANDBY/ON Power Off and Exit the Service factory Mode
B A
Fig.6