PDP-5016HD
166
1
2
4
1
2
3
4
C
D
F
A
B
E
7. ADJUSTMENT
7.1 ADJUSTMENT REQUIRED WHEN THE SET IS REPAIRED OR REPLACED
1. At shipment, the unit is adjusted to its best conditions. Normally, it is not necessary to readjust even if an assembly is replaced. If the
adjustment is shifted or if it becomes necessary to readjust because of part replacement, etc., perform the adjustment as described below.
2. Any value changed in Factory Menu/Module Adj. mode will be stored in memory as soon as it is changed. Before readjustment, take
note of the original values for reference in case you need to restore the original settings.
3. Use a stable AC power supply.
No adjustment required
No adjustment required
INTERFACE Assy
No adjustment required
MAIN Assy
No adjustment required
SUB IR&LED Assy
No adjustment required
SUB KEY Assy
No adjustment required
SUB SIDE AV Assy
No adjustment required
SUB THERMAL SENSOR Assy
No adjustment required
SENSOR Assy
Writing of backup data is required. Refer to the "7.2
BACKUP WHEN THE PANEL UNIT IS ADJUSTEND".
POWER SUPPLY Unit
DIGITAL Assy
42 X MAIN DRIVE Assy
No adjustment required
Refer to "7.3 HOW TO CLEAR HISTORY DATA".
No adjustment required
50 Y MAIN DRIVE Assy
No adjustment required
50 Y SUB DRIVE Assy
No adjustment required
50 X MAIN DRIVE Assy
No adjustment required
50 X SUB DRIVE Assy
No adjustment required
Service Panel Assy
Refer to "7.4 EXCHANGE OF SERVICE PANEL ASSY".
Writing of backup data is required.
Refer to the "7.2 BACKUP WHEN THE PANEL
UNIT IS ADJUSTED. "
When any of the following assemblies is replaced
PDP-4216
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
