Pioneer PDK-5005 Скачать руководство пользователя страница 76

Страница: 76 / 288

How to use the standard mounting components

[507CMX : 427CMX]

4.1 Standard Mounting Components Features and Characteristics

In addition to reliability and vivid display resulting from its large screen area, brightness, and image quality, the Plasma

Display (PDP-507CMX/PDP-427CMX) is thin and lightweight. This panel can be mounted in locations not possible for

conventional displays.

We considered various mounting patterns and operating conditions during the design of the Plasma Display (PDP-

507CMX/PDP-427CMX). A wide range of standard mounting hardware is available for easy mounting.

Video Card: PDA-5003/PDA-5004

The video card makes video input and analog RGB input possible.

This product has a total of three lines: a COMPOSITE (1), S INPUT (1), and an analog RGB INPUT or COMPONENT

INPUT (1). Furthermore, it can handle three-line or two-line audio, thus increasing the uses for video presentations.

Table Top Stand: PDK-TS07

This on-board support designed for the Plasma Display enables vertical placement of the unit.

Tilt Mount Unit: PDK-5011

This mount permits tilting of the display downward from the horizontal by up to 25 degrees. Mount depth is 145 mm

or less (in vertical position, without optional speaker). This hardware permits a wide range of viewing angles.

Wall Mount Unit: PDK-WM01

Distance from the rear surface of the Plasma Display to the wall is 32 mm.

This mount provides installation holes for various wall-mounting arrangements. The mount is constructed so that it

can be easily attached to the main unit.

Ceiling Mount Unit: PDK-5012

Simple rod-type mounting hardware permits display panning over a range of 45 degrees and up to 25-degree downward

tilting from the horizontal. This hardware enables installation of the unit in a wide variety of locations.

Mobile Cart: PDK-5014

This is an extremely stable movable stand that one person can use to freely move the Plasma Display.

It can also be used to adjust the screen height and the screen angle to match the line of sight.

PDP Bracket: PDK-5005 (Can be used only with the PDP-507CMX)

Can be used as a handle when moving the unit, or as a frame when wire-suspending it or hanging it on the wall. Most

suitable for temporary use when quick, easy, and safe attachment is necessary.

Speaker System: PDP-S53-LR (Can be used only with the PDP-507CMX)

Speaker System: PDP-S56-LR (Can be used only with the PDP-427CMX)

Two way speakers feature 5 cm (2 in.) tweeter and 8 cm (3-3/16 in.) woofer in a vertical arrangement.

Содержание PDK-5005

































































































































































































































































































Результаты поиска

Содержание PDK-5005

Отзывы:

Похожие инструкции для PDK-5005

Бренды по названию

Популярные бренды

Pioneer PDK-5005, Техническое руководство

Результаты поиска

Содержание PDK-5005

Отзывы:

Похожие инструкции для PDK-5005

Бренды по названию

Популярные бренды