Pioneer PDK-5005, Техническое руководство

Страница: 161 / 288

161
Before Beginning Adjustments
5) Screen size
When a video card is installed
Video signal 4:3 source
(NTSC, 625i, etc.)
Video signal 16:9 source
(750p, 1080i, etc.)
Screen size
Personal computer
signal
Remarks
FULL
This is for wide-screen video
(squeeze) (For a 16:9 source,
roundness is nearly accurate).
UNDERSCAN
This is used by a broadcast
station and the like for viewing
the portion outside the normal
effective display range.
2.35:1
Displays 2.35:1 squeezed image
full-screen without black border.
However, portions of image at
right and left edges are cut.
14:9
Displays expanded 4:3 screen
image without distortion.
WIDE
This is for reproducing the 4:3
portion of a 4:3 source or 16:9
source on the entire screen
(roundness near the center is
nearly accurate).
ZOOM
For a video signal, this is for a
cinesco (cinema scope) size video.
4:3
For a 4:3 source, roundness can
be accurately reproduced (In order
to prevent burning of the screen,
this screen size should not be
used when possible).
DOT BY DOT
The input signal corresponds 1:1
with the pixels of the Plasma
Display for an accurate
reproduction.
PDP-427CMX:
This unit is designed with
horizontally oblong elements, with
the result that the image
displayed will appear more oblong
than the original input signal.
This screen size exists for a personal computer
signal when the input signals a less than the pixels
of the plasma display. For details, refer to the
correspondence signal table.
When selecting the underscan by switching the
screen size, please set to UNDERSCAN: ON using
PRO USE of the integrator mode.
100
100
100
100
100 100
100 95 95 95 95
95 95
100
95
95
95
95
95 95
95
95
73
73
95 95
90
90
100 100
100
100
100 100
100
100
72 72
90
90
Unit: % (percent)
84
84
74
74
74 74
95 95
74
74
74 74
100 100
100
100
• The screen size settings are stored in memory for each function and for each input signal. Up to eight (8) sizes can be stored in
memory for each function.