Pioneer PDK-5005 Скачать руководство пользователя страница 134

Страница: 134 / 288

134

PDP Bracket: PDK-5005

Use the Special eye bolt only at the specified locations.

Improper use of Special eye bolts within the Plasma Display main body may

damage the display's blind nut.

Caution

Special eye

bolt

Wire

PDP bracket

When hanging by wires etc., do not add any devices other than the Plasma Display, PDP

bracket, and the optional speakers nor hang it with a single wire, because there is a danger

that excessive load will be applied, damaging the equipment.

Caution

20˚

Do not attempt to correct tilt by applying downward load with the wires. Doing so may apply

excessive load upon and damage the wire connections and metal mounting fixture.

Caution

During installation, strictly observe the related operating conditions in “3.5 Special installation (PDP-507CMX)

(pg. 35)”.

4.10.5 Wire hanging

Note

When hanging by wires using eyebolts (Plasma Display facing sideways), the display will tilt forward by approximately

20 degrees due to its weight distribution. Therefore, take this into consideration in advance when hanging it by

wires.

Attach wires to the bolts, as indicated in the figure.

To attach the wires to the ceiling, secure two wires at

two independent points for safety.

• To keep the Plasma Display main body from vibrating,

fix the main body by attaching wire to the bottom bolt.

• Use wires strong enough to withstand a weight of

46.4 kg that is the total of the 35.5 kg of the Plasma

Display, the 4.1 kg of the PDP bracket, and the 3.4 kg

x 2 of the optional speakers.

When installing the Plasma Display, do not use the handles as means of hanging the display.

NO!

[507CMX]

Содержание PDK-5005

































































































































































































































































































Результаты поиска

Содержание PDK-5005

Отзывы:

Похожие инструкции для PDK-5005

Бренды по названию

Популярные бренды

Pioneer PDK-5005, Техническое руководство

Результаты поиска

Содержание PDK-5005

Отзывы:

Похожие инструкции для PDK-5005

Бренды по названию

Популярные бренды