Pioneer PDA-4002, Техническое руководство

Страница: 151 / 163

151
16) OSD indication setting
Operation is the same as with other input functions. With the remote control, use the
5
and
∞
buttons to select the
mode to be set, and confirm your selection with the SET button. With the operation panel, select the mode with the +
and - buttons, then confirm your selection with the SET button.
This function disables OSD indication such as function display. When it is not necessary to select OSD indication for
automatic operation, set to "OSD:OFF". Even during "OSD:OFF" setting, MENU and KEY LOCK/UNLOCK setting can be
displayed.
The factory-preset value is ON.
* Even when [OSD:OFF] are being set, it is possible to indicate the following OSD:
1
Indicates menu
2
Indicates announcement while KEY KOCK is being set, and indicated KEY LOCK/UNLOCK setting.
15) FULL MASK setting
Operation is the same as with other input functions. With the remote control, use the
5
and
∞
buttons to select the
item to be set, and confirm your selection with the SET button. With the operation panel, select the item with the + and
- buttons, then confirm your selection with the SET button.
For example, if WHITE is selected and the set button is pressed, the control screen is displayed as white regardless of
the input signal. During this time, neither PLAY operation or On Screen Display can be used. To reset, press the set
button again or turn the power OFF/ON using the remote control or the main operation panel. (Note: Use this for aging,
panel burnout reduction, etc.)
(Note): When FULL MASK setting is performed with RS-232C, data is saved as the latest data in the memory. In this
case, to cancel the setting, select <AJY> with RS-232C followed by the cancel command <FMN>.
L
F U
M
L
K
A S
R E D
G R E E N
B L U E
Y E L L O W
M A G E N T A
C Y A N
W H I T E
X E I T
Integrator mode
O S D
O F F
N O