Pioneer MZ360500EX, Руководство пользователя

Страница: 94 / 128

94
Customising preferences of the navigation
Customising the map screen
settings
You can fine-tune the appearance of the map
screen.
Adjust the map view to your needs, choose
suitable colour themes from the list for both
daytime and night use, change the blue arrow
to a 3D car model, show or hide 3D buildings,
turn track logging on or off, and manage your
place visibility settings (which places to show
on the map).
1. Display the settings screen.
➲
For details of the operations, refer to
“Displaying the screen for navigation
settings” on page 91.
2. Touch [Map Settings].
The “ Map Settings ” screen appears.
3. Touch the setting item.
You can see the effect when you change a
setting.
• View Mode :
Switch the map view between a 3D
perspective view and a 2D topdown view.
• Viewpoint :
Adjust the basic zoom and tilt levels to your
needs. Three levels are available.
• Automatic Overview :
When selected, the map zooms out to show
an overview of the surrounding area if the
next route event (manoeuvre) is far. When
you get close to the event, the normal map
view returns.
• Colours :
Switch between daytime and night colour
modes or let the software switch between
the two modes automatically a few minutes
before sunrise and a few minutes after
sunset.
• Day Map Colour :
Select the colour scheme used in daytime
mode.
• Night Map Colour :
Select the colour scheme used in night
mode.
• 3D Vehicle Gallery :
Replace the default position marker to one
of the 3D vehicle models.
You can select separate icons for different
vehicle types selected for route planning.
Separate icons can be used for car,
pedestrian and the other vehicles.
• Landmarks :
Show or suppress 3D landmarks, 3D
artistic or block representations of
prominent or well-known objects.
• Buildings :
Show or suppress 3D city models, 3D
artistic or block representation of full city
building data containing actual building size
and position on the map.
• 3D Terrain :
Show or suppress the 3D elevation of the
surrounding terrain.
• Track Logs :
Turn on or off track log saving, that is,
saving the sequence of the locations your
journeys go through.
• Place Markers :
Select which places to show on the map
while navigating. Too many places make
the map crowded so it is a good idea to
keep as few of them on the map as
possible. For this, you have the possibility
to save different place visibility settings.
You have the following possibilities:
– Touch the checkbox to show or hide the
place category.
– Touch the name of the place category to
open the list of its subcategories.
– Touch [ More ] to save the current place
visibility set or to load a previously saved
one. Here you can also revert to the
default visibility settings.
Setting the visual guidance
Adjust how this system helps you navigate
with different kinds of route related
information on the map screen.
1. Display the settings screen.
➲
For details of the operations, refer to
“Displaying the screen for navigation
settings” on page 91.
2. Touch [Visual Guidance Settings].
3. Touch the setting item.
13-MAN-AVICF550-EN.fm Page 94 Monday, April 8, 2013 3:02 PM