Pioneer MZ360500EX, Руководство пользователя

Страница: 52 / 128

52
Checking and modifying the current route
• Engine Type :
Select the engine and fuel type of your
vehicle. This helps in estimating the CO2
emission.
• Fuel Price :
Enter the average fuel price for travel cost
calculation. The currency can be set in
“
Regional ” settings.
• Max. Speed :
Set the maximum speed you travel with the
vehicle.
• Use Extended Settings :
Check this box to enable more settings for
the following parameters.
–
Length :
Set the total length of the vehicle.
– Width :
Set the width of the vehicle.
– Height :
Set the height of the vehicle.
– Trailer :
Set if there is a trailer attached to the
vehicle.
– Maximum Allowed Weight :
Set the maximum allowed weight of the
vehicle.
– Actual Weight :
Set the actual weight of the vehicle.
– Freight :
Select one or more hazard types if the
vehicle carries dangerous material.
You can also set the following option:
• Confirm Parameters for Each Route
Planning :
When enabled, the list of vehicle
parameters always appears before route
calculation. This helps you quickly adjust
the parameters when some of them (actual
weight, for instance) often change.
7. When finished modifying an existing
vehicle profile, touch [Back].
The settings are completed.
❒
While this profile is selected, the
parameters of your vehicle are taken into
account when planning routes.
Setting the route calculation
These settings determine how routes will be
calculated. Select the type of vehicle you are
driving, the road types used in route planning,
and the route planning method.
1. Touch [Menu] on the map screen.
The “ Navigation Menu ” screen appears.
➲
For details of the operations, refer to
“Screen switching overview” on page 27.
2. Touch [More...], then [Settings].
3. Touch [Route Settings].
4. Touch the setting item.
• Navigation Mode :
On-road navigation creates a turn by turn
itinerary using the road network on the
map. Switch to off-road navigation to
navigate between destinations in a straight
line.
• Route Planning Method :
The route calculation can be optimised for
different situations and vehicle types by
changing the planning method.
–
Fast :
Calculates a route with the shortest
travel time to your destination as a
priority. Usually the best selection for fast
and normal cars.
– Green :
Calculates a quick but fuel efficient route
based on the fuel consumption data
given in Route settings. Travel cost and
CO2 emission calculations are
estimations only. They cannot take
elevations, curves and traffic conditions
into account.
– Short :
Calculates a route with the shortest
distance to your destination as a priority.
Usually practical for pedestrians, cyclists
or slow vehicles. Searching for a short
route regardless of the speed, this route
type is rarely practical for normal
vehicles.
– Easy :
Results in a route with fewer turns and no
difficult manoeuvres. With this option,
you can make this system to take, for
example, the motorway instead of a
series of smaller roads or streets.
13-MAN-AVICF550-EN.fm Page 52 Monday, April 8, 2013 3:02 PM