Pioneer MVH-X560BT, Руководство пользователя

Страница: 5 / 164

Black plate (5,1)
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
#
If MW/LW band is selected, only BSM , LOCAL
and SEEK are available.
FM SETTING (FM sound quality settings)
The sound quality level can be set to match the
broadcast signal conditions of the FM band sig-
nal.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
!
STANDARD
–
This is the standard setting.
!
HI-FI
–
This is the setting to use to prioritize
the high quality of stereo sound.
!
STABLE
–
This is the setting to use to priori-
tize the low noise of monaural sound.
BSM (best stations memory)
BSM (best stations memory) automatically stores
the six strongest stations in the order of their sig-
nal strength.
1
Press M.C. to turn BSM on.
To cancel, press M.C. again.
REGIONAL (regional)
When AF is used, the regional function limits the
selection of stations to those broadcasting region-
al programs.
1
Press M.C. to turn the regional function on or
off.
LOCAL (local seek tuning)
Local seek tuning allows you to tune in to only
those radio stations with sufficiently strong sig-
nals for good reception.
1
Press M.C. to select the desired setting.
FM: OFF
—
LV1
—
LV2
—
LV3
—
LV4
MW/LW:
OFF
—
LV1
—
LV2
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
TA (traffic announcement standby)
1
Press M.C. to turn traffic announcement
standby on or off.
AF (alternative frequencies search)
1
Press
M.C.
to turn AF on or off.
NEWS (news program interruption)
1
Press M.C. to turn the NEWS function on or
off.
SEEK (LEVER tuning setting)
You can assign a function to the LEVER on the
unit.
Select
MAN (manual tuning) to tune up or down
manually or select PCH (preset channel) to switch
between preset channels.
1
Press
M.C.
to select
MAN
or
PCH
.
USB storage device
MTP connection
MTP-compatible Android devices (running
Android OS 4.0 or higher) can be connected by
MTP connection using the USB source. To con-
nect an Android device, use the cable that came
with the device.
Notes
!
This function is not compatible with
MIXTRAX.
!
This function is not compatible with WAV.
Basic operations
Playing songs on a USB storage device
1
Plug in the USB storage device using the USB
cable.
Stopping playback of files on a USB storage de-
vice
1
Disconnect the USB storage device.
Selecting a folder
1
Press 1 / or 2 / .
Selecting a track
1
Turn LEVER .
Fast forwarding or reversing
1
Turn and hold down LEVER to the right or left.
!
When playing compressed audio, there is no
sound during fast forward or reverse.
Returning to root folder
1
Press and hold BAND / .
Switching between playback memory devices
You can switch between playback memory devices
on USB storage devices with more than one Mass
Storage Device-compatible memory device.
1
Press BAND / .
!
You can switch between up to 32 different
memory devices.
Note
Disconnect USB storage devices from the unit
when not in use.
Operations using the MIXTRAX
button
Turning MIXTRAX on or off
You cannot use this function with
USB MTP .
1
Press MIX to turn MIXTRAX on or off.
!
For more details about MIXTRAX, refer to
About MIXTRAX on page 13.
!
When MIXTRAX is in use, the sound retriever
function is disabled.
Switching the display
Selecting the desired text information
1
Press DISP to cycle between the following:
MP3/WMA/WAV
!
TRACK INFO (track title/artist name/album
title)
!
FILE INFO
(file name/folder name)
!
ELAPSED TIME (track number and play-
back time)
!
CLOCK (source name and clock)
!
SPEANA (spectrum analyzer)
Selecting and playing files/
tracks from the name list
1 Press to switch to the file/track name
list mode.
2 Use M.C. to select the desired file name
(or folder name).
Selecting a file or folder
1
Turn M.C.
Playing
1
When a file or track is selected, press M.C.
English
Using this unit
5
Section
Using this unit
En
02
<QRD3242-A>5