Pioneer MVH-X465UI, Руководство пользователя

Страница: 15 / 140

Black plate (15,1)
!
Turn MIXTRAX off if the visual effects it pro-
duces have adverse effects on driving. Refer
to
Operations using the MIXTRAX button on
page 5.
MIXTRAX menu
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabled when
MIXTRAX is on.
SHORT PLAYBCK (short playback mode)
You can select the length of the playback time.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
1.0 MIN (1.0 minute)
—
1.5 MIN (1.5 minutes)
—
2.0 MIN (2.0 minutes)
—
2.5 MIN (2.5 minutes)
—
3.0 MIN (3.0 minutes)
—
OFF (off)
FLASH AREA (flash area)
You can select areas for flashing colors.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
KEY/DISPLAY (key and display)
—
KEY (key)
—
OFF (off)
!
When
OFF
is selected, the color set under
IL-
LUMI is used as the display color.
FLASH PATTERN (flash pattern)
The flashing color and MIXTRAX special effects
display change with changes in the sound and
bass levels.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
!
SOUND LEVEL 1 to SOUND LEVEL 6
–
The
flash pattern changes according to the
sound level. Select a desired mode.
!
LOW PASS 1 to LOW PASS 6
–
The flash
pattern changes according to the bass
level. Select a desired mode.
!
RANDOM 1
–
The flash pattern changes
randomly according to the sound level
mode and low pass mode.
!
RANDOM 2
–
The flash pattern changes
randomly according to the sound level
mode.
!
RANDOM 3
–
The flash pattern changes
randomly according to the low pass mode.
DISPLAY FX
(display effect)
The MIXTRAX special effects display can be turned
on or off.
1
Press M.C. to select the desired setting.
ON (MIXTRAX special effects display)
—
OFF
(normal display)
CUT IN FX (manual cut-in effect)
You can turn on or off the MIXTRAX sound effects
while manually changing tracks.
1
Press M.C. to select the desired setting.
ON (on)
—
OFF (off)
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. to display the main menu.
3 Turn M.C. to change the menu option
and press to select INITIAL.
4 Turn M.C. to select the initial menu func-
tion.
Once selected, the following initial menu func-
tions can be adjusted.
!
REAR-SP and S/W UPDATE are not available
for MVH-X465UI.
!
SP-P/O MODE is not available for MVH-
X565BT.
FM STEP (FM tuning step)
1
Press M.C. to select the FM tuning step.
100 (100 kHz)
—
50 (50 kHz)
MW STEP
(MW tuning step)
1
Press M.C. to select the MW tuning step.
9 (9 kHz)
—
10 (10 kHz)
REAR-SP (rear output setting)
The rear speaker leads output and the RCA output
of this unit can be used to connect a full-range
speaker or subwoofer. Select a suitable option for
your connection.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
!
FUL
–
Select when there is a full-range
speaker connected to the rear speaker
leads output.
!
SW
–
Select when there is a subwoofer
connected directly to the rear speaker
leads output without any auxiliary amp.
SP-P/O MODE (rear output and preout setting)
The rear speaker leads output and the RCA output
of this unit can be used to connect a full-range
speaker or subwoofer. Select a suitable option for
your connection.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
!
REAR/SUB.W
–
Select when there is a full-
range speaker connected to the rear speak-
er leads output and there is a subwoofer
connected to the RCA output.
!
SUB.W/SUB.W
–
Select when there is a
subwoofer connected directly to the rear
speaker leads output without any auxiliary
amp and there is a subwoofer connected
to the RCA output.
!
REAR/REAR
–
Select when there is a full-
range speaker connected to the rear speak-
er leads output and the RCA output.
If there is a full-range speaker connected to
the rear speaker leads output and the RCA
output is not used, you may select either
REAR/SUB.W or REAR/REAR .
S/W UPDATE (updating the software)
This function is used to update this unit with the
latest Bluetooth software. For about Bluetooth
software and updating, refer to our website.
!
Never turn the unit off while the Bluetooth soft-
ware is being updated.
1
Press M.C. to start updating.
Follow the on-screen instructions to finish up-
dating the Bluetooth software.
System menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. to display the main menu.
3 Turn M.C. to change the menu option
and press to select SYSTEM.
English
Using this unit
15
Section
Using this unit
En
02
<QRD3243-A>15