Pioneer MVH-P7300, Руководство по эксплуатации

Страница: 33 / 188

1
Press M.C. to display the setting mode.
2
Turn
M.C.
to adjust the level.
Adjustment range:
0
to
+6
3
Press
M.C.
to confirm the selection.
High Pass Filter
(high pass filter adjustment)
When you do not want low sounds from the subwoo-
fer output frequency range to play from the front or
rear speakers, turn on the HPF (high pass filter). Only
frequencies higher than those in the selected range
are output from the front or rear speakers.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the cut-off frequency.
Off (off)
—
50Hz
—
63Hz
—
80Hz
—
100Hz
—
125Hz
3
Press
M.C.
to confirm the selection.
SLA
(source level adjustment)
SLA (Source level adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
!
When selecting FM as the source, you cannot
switch to
SLA .
!
Settings are based on the FM volume level, which
remains unchanged.
!
The AM volume level can also be adjusted with
this function.
1
Press M.C. to display the setting mode.
2
Push M.C. up or down to adjust the source vo-
lume.
Adjustment range:
+4 to
–
4
Note
You cannot select Custom1 and Custom2 when
using the auto-equalizer.
System settings
1 Display the system menu.
Refer to Basic menu operations on page 12.
2 Turn M.C. to select the system function.
After selecting, perform the following proce-
dures to set the system function.
Guide Info (guide information)
1
Press
M.C.
to display the guide information.
Refer to About guide information on page 13.
Clock ADJ (date and clock)
1
Press
M.C.
to display the setting mode.
2
Press
M.C.
to select the segment of the clock dis-
play you wish to set.
Day
—
Month
—
Year
—
Hour
—
Minute
—
AM/PM
3
Turn M.C. to set the date and time.
Picture ADJ (picture adjustment)
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the function to be adjusted.
Press to select.
Brightness
—
Contrast
—
Color
—
Hue
—
Dimmer
—
Temperature
—
Black Level
For details about the settings, refer to Changing
the picture adjustment on page 41.
When you select Black Level , press M.C. to turn
the setting on or off.
3
Turn M.C. to increase or decrease the level of the
selected item.
Adjustment range:
+24 to
–
24
!
Dimmer can be adjusted from +48 to +1 .
!
Temperature can be adjusted from +3 to
–
3 .
Caution Lang. (caution language settings)
You can switch the display language for the warning
message of the parking brake interlock.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
English
—
Français
—
Español
3
Press M.C. to confirm the selection.
System Lang. (menu language settings)
En
33
English
Section
03
Operating this unit