Pioneer MVH-P7300, Руководство по эксплуатации

Страница: 27 / 188

Stopping playback of files on an SD memory card
1
Remove the front panel.
2
Press on the SD memory card until it clicks.
The SD memory card is ejected.
3
Pull out the SD memory card.
4
Re-attach the front panel.
Selecting a folder
1
Push M.C. up or down.
Selecting a file
1
Push M.C. left or right.
Searching every 10 files
1
Push and hold M.C. left or right.
Notes
!
Disconnect USB storage devices from the unit
when not in use.
!
Incompatible text stored with the video image
file may not be displayed or may be displayed
incorrectly.
!
When playing external storage devices that
contain a mixture of various media file types,
switch between media file types when playing
different files.
Refer to
A/V Format (switching media file
types) on page 19.
Selecting and playing files
from the name list
Operations are the same as those for moving
images. (Refer to
Selecting and playing files
from the name list on page 18.)
Function settings
1 Press M.C. to display the function
menu.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Play/Pause
(pause)
1
Press M.C. to pause or resume.
Random (random play)
1
Press M.C. to turn random play on or off.
Play Mode (repeat play)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select a repeat play range.
!
Folder
–
Repeat the current folder
!
All
–
Repeat all files
3
Press
M.C.
to confirm the selection.
Capture
(capturing an image in JPEG files)
You can capture image data and use it as wallpaper.
Images can be stored and recalled easily in this unit.
!
Only one image can be stored on this unit. Old
images are overwritten with the new ones.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the desired setting.
3
Press M.C. to confirm the selection.
Rotate (picture rotation)
1
Press M.C. to display the setting mode.
2
Press M.C. to rotate the displayed picture 90°
clockwise.
Wide Mode (switching the wide mode)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
Full (full)
—
Just (just)
—
Cinema (cinema)
—
Zoom
(zoom)
—
Normal
(normal)
For details about the settings, refer to Changing
the wide screen mode on page 40.
3
Press M.C. to confirm the selection.
Time Per Slide (slideshow interval time setting)
JPEG files can be viewed as a slide show on this unit.
In this setting, the interval between each image can
be set.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the desired setting.
!
5sec
–
JPEG images switch at intervals of 5
seconds
!
10sec
–
JPEG images switch at intervals of 10
seconds
!
15sec
–
JPEG images switch at intervals of 15
seconds
!
Manual
–
JPEG images can be switched
manually
3
Press M.C. to confirm the selection.
Display (display setting)
En
27
English
Section
03
Operating this unit