Pioneer MVH-AV189, Руководство пользователя

Страница: 23 / 32

23
External video component and
the display
1
2
3
6
7
8 9
3
a b
c d
e
5
4
1
Rear display with RCA input jacks
2 To video input
3
RCA cables (sold separately)
4 This product
5
Yellow ( V OUT )
6 AUX input
7
Mini-jack AV cable (CD-RM10) (sold separately)
8 Yellow
9
Red, white
a To Yellow
b
To Red, white
c To video output
d
To audio outputs
e External video component (sold separately)
The appropriate setting is required to use the external video
component.
 AUX source on page 13
WARNING
NEVER install the rear display in a location that enables
the driver to watch the video source while driving.
This product’s rear video output is for connection of a display
to enable passengers in the rear seats to watch the video
source.
Precautions before installation
CAUTION
Never install this product in places where, or in a manner
that:

Could injure the driver or passengers if the vehicle
stops suddenly.

May interfere with the driver’s operation of the
vehicle, such as on the floor in front of the driver’s
seat, or close to the steering wheel or gearstick.
 To ensure proper installation, be sure to use the
supplied parts in the manner specified. If any parts
are not supplied with this product, use compatible
parts in the manner specified after you have the parts’
compatibility checked by your dealer. If parts other
than supplied or compatible ones are used, they may
damage internal parts of this product or they may
work loose and the product may become detached.
 Do not install this product where it may (i) obstruct
the driver’s vision, (ii) impair the performance of any
of the vehicle’s operating systems or safety features,
including airbags, hazard lamp buttons or (iii) impair
the driver’s ability to safely operate the vehicle.

Never install this product in front of or next to the
place in the dashboard, door, or pillar from which one
of your vehicle’s airbags would deploy. Please refer
to your vehicle’s owner’s manual for reference to the
deployment area of the frontal airbags.
Before installing
 Consult with your nearest dealer if installation requires
drilling holes or other modifications of the vehicle.
 Before making a final installation of this product, temporarily
connect the wiring to confirm that the connections are
correct and the system works properly.

Do not install this product in a position where the opening
of the LCD panel is obstructed by any obstacles, such as the
gearstick. Before installing this product, be sure to leave
sufficient space so that the LCD panel does not obstruct the
gearstick when it is fully opened. This may cause interfer-
ence with the gearstick, or a malfunction of the mechanism
of this product.
Installation
Camera
About rear view camera
When you use the rear view camera, the rear view image is
automatically switched from the video by moving the gearstick to
REVERSE ( R ). Rear View mode also allows you to check what
is behind you while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR
VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR
DAMAGE.
CAUTION
 The screen image may appear reversed.
 With the rear view camera you can keep an eye on
trailers, or back into a tight parking spot. Do not use for
entertainment purposes.
 Objects in rear view may appear closer or more distant
than in reality.
 The image area of full-screen images displayed while backing
or checking the rear of the vehicle may differ slightly.
1
2
3
4
5 6
7
8
1 Rear view camera (ND-BC8) (sold separately)
2
To video output
3 RCA cable (supplied with ND-BC8)
4
This product
5 Brown ( R.C IN )
6
Power supply
7 Power cord
8
Violet/white ( REVERSE-GEAR SIGNAL INPUT )

Power cord on page 21
Connect only the rear view camera to R.C IN . Do not connect
any other equipment.
Some appropriate settings are required to use other view
cameras.
 Setting the rear view camera on page 14
23 < QRB3574-A >
Connection Connection Installation