Pioneer MVH-AV170, Руководство по эксплуатации

Страница: 26 / 36

26
Boosting the bass
1 Display the “
Audio
” setting screen.
 Displaying the “
Audio
” setting screen on page 25
2 Touch [ Bass Booster ].
3 Touch to select the bass boost level from
0
to
+6
.
Setting the high pass filter
1 Display the “ Audio ” setting screen.

Displaying the “ Audio ” setting screen on page 25
2 Touch [High Pass Filter].
3 Touch the item.
The following items are available:
Off (default), 50Hz , 63Hz , 80Hz , 100Hz , 125Hz .
Using the equalizer
Recalling equalizer curves
There are seven stored equalizer curves that you can easily recall
at any time. Here is a list of the equalizer curves:
●
S.Bass is a curve in which only low-pitched sound is boosted.
●
Powerful
is a curve in which low- and high-pitched sounds
are boosted.
●
Natural
is a curve in which low- and high-pitched sounds
are slightly boosted.
●
Vocal
is a curve in which the midrange, which is the human
vocal range, is boosted.
●
Flat
is a flat curve in which nothing is boosted.
●
Custom1 is an adjusted equalizer curve that you create. If
you select this curve, the effect is applied to all AV sources.
●
Custom2 is an adjusted equalizer curve that you create. If
you select this curve, the effect is applied to all AV sources.
p
The default setting is “ Powerful ”.
1 Display the “ Audio ” setting screen.

Displaying the “ Audio ” setting screen on page 25
2 Touch [
Graphic EQ
].
3 Touch the equalizer you want.
Customizing the equalizer curves
You can adjust the currently selected equalizer curve setting
as desired. Adjustments can be made with a 5-band graphic
equalizer.
p
If you make adjustments when a curve “ S.Bass ”, “ Powerful ”,
“ Natural ”, “ Vocal ”, or “ Flat ” is selected, the equalizer curve
settings will be changed to “ Custom1 ” mandatorily.
p
If you make adjustments when the “ Custom2 ” curve is
selected for example, the “ Custom2 ” curve will be updated.
p
“ Custom1 ” and “ Custom2 ” curves can be created common
to all sources.
1 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 25
2 Touch [ Graphic EQ ].
3 Select a curve that you want to use as the basis
of customizing.
4 Touch the frequency for which you want to
adjust the level.
p
If you trail a finger across the bars of multiple equalizer
bands, the equalizer curve settings will be set to the value of
the touched point on each bar.
< CRB4570-A >
Audio adjustments