manualshive.com logo in svg

Pioneer FX-MG9106ZT-91/ES, Руководство по обслуживанию, Страница: 77 / 100

Поделиться
Скачать
Pioneer FX-MG9106ZT-91/ES Скачать руководство пользователя страница 77

77

FX-MG9106ZT,M9106ZT-91

7.1.2 SELF-DIAGNOSTIC FUNCTION

Audio System Service Test

Operation procedures

Displaying service test execution results

• The test results every physical addresses (equipment codes) are displayed on the LCD (liquid crystal display) unit

of the H/U.

• The contents of display are checked switching them by the "TuneUp" / "TuneDown" button of the H/U.

• If CHEC (test) or ECHn (exchange) is displayed, detailed information is displayed subsequently.

Example of display of test results

When the service test mode is switched, "system test" is performed and each diagnostic memory is collected.  From

both results, the test results of the current and previous states regarding each connecting equipment of a system are

displayed on LCD (liquid crystal display) unit of the H/U.

Contents of display

Display

Original term

Meaning

Remarks

good

Good

Normal

No error code

nCon

No Connection Unconnected

Although the system recognized responses at registration, 

there is no response when diagnosis is started.

CHEC

Check

Test

An error code indicating that diagnosis is necessary is entered.

ECHn

Exchange

Exchange  

An error code indicating that exchange is necessary is entered.

OLd

Old

Old version

Unit which corresponds to an old diagnostic system

nrES

No Response

No response

Although there is a response when diagnosis is started, 

there is no reply to diagnostic information.

Purpose of operation

Procedure

How to enter service

Press the "Disc" (or "CD") button three times with the ch "1" and "6" buttons of the H/U 

test mode

(Head Unit) pressed at the same time.

(When the service test mode is switched, a beep sound is output.

How to exit from 

ACC OFF  or  Long press the "Disc" button for 1.7 seconds.

service test mode

Execution of re-test

Press the ch "1" button.

(The service test is re-executed.)

Cancellation of 

Long press the ch "5" button for 1.7 seconds.

diagnostic memory

(When the diagnostic memory is canceled, a beep sound is output for three seconds.)

Equipment for constructing system A

Equipment code (P: physical address)

Radio cassette

190

CD-CH (CD changer)

360

MD-CH (MD changer)

3A0

Содержание FX-MG9106ZT-91/ES





































































































Отзывы:

Нет отзывов