Pioneer FH-X500UI, Руководство пользователя

Страница: 16 / 80

Black plate (16,1)
You can select flashing color patterns.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
!
SOUND LEVEL 1
to
SOUND LEVEL 6
–
Flashing colors will flash on and off in syn-
chronization with the sound level in a
song. Select the desired mode.
!
LOW PASS 1 to LOW PASS 6
–
Flashing
colors will flash on and off in synchroniza-
tion with the bass level in a song. Select
the desired mode.
!
RANDOM 1
–
The pattern for the flashing
colors is randomly selected from the sound
level mode and low pass mode.
!
RANDOM 2
–
The pattern for the flashing
colors is randomly selected from the sound
level mode.
!
RANDOM 3
–
The pattern for the flashing
colors is randomly selected from the low
pass mode.
DISPLAY FX
(display effect)
The MIXTRAX special effects display can be turned
on or off.
1
Press M.C. to select the desired setting.
ON (MIXTRAX special effects display)
—
OFF
(normal display)
CUT IN FX (manual cut-in effect)
You can turn on or off the MIXTRAX sound effects
while manually changing tracks.
1
Press M.C. to select the desired setting.
ON (on)
—
OFF (off)
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main menu
appears in the display.
3 Turn M.C. to change the menu option
and press to select INITIAL.
4 Turn M.C. to select the initial menu func-
tion.
Once selected, the following initial menu func-
tions can be adjusted.
!
S/W UPDATE is not available for FH-X500UI.
SP-P/O MODE
(rear output and preout setting)
The rear speaker leads output and the RCA output
of this unit can be used to connect a full-range
speaker or subwoofer. Select a suitable option for
your connection.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
!
REAR/SUB.W
–
Select when there is a full-
range speaker connected to the rear speak-
er leads output and there is a subwoofer
connected to the RCA output.
!
SUB.W/SUB.W
–
Select when there is a
subwoofer connected directly to the rear
speaker leads output without any auxiliary
amp and there is a subwoofer connected
to the RCA output.
!
REAR/REAR
–
Select when there is a full-
range speaker connected to the rear speak-
er leads output and the RCA output.
If there is a full-range speaker connected to
the rear speaker leads output and the RCA
output is not used, you may select either
REAR/SUB.W or REAR/REAR .
S/W UPDATE
(updating the software)
This function is used to update this unit with the
latest Bluetooth software. For about Bluetooth
software and updating, refer to our website.
!
Never turn the unit off while the Bluetooth soft-
ware is being updated.
1
Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish up-
dating the Bluetooth software.
System menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main menu
appears in the display.
3 Turn M.C. to change the menu option
and press to select SYSTEM.
4 Turn M.C. to select the system menu
function.
For details, refer to System menu on page 14.
Using an AUX source
1 Insert the stereo mini plug into the AUX
input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to
AUX
(auxiliary input) on page 14.
Switching the display
Selecting the desired text information
1
Press DISP to cycle between the following:
!
Source name
!
Source name and clock
If an unwanted display appears
Turn off the unwanted display using the proce-
dures listed below.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to display DEMO OFF and press
to select.
4 Turn M.C. to switch to YES.
5 Press M.C. to select.
Operating this unit
16
Section
Operating this unit
En
02
<QRD3222-A>16