Pioneer ELITE VSX-LX505 Скачать руководство пользователя страница 151

Страница: 151 / 212

151

Setup

Miscellaneous

Firmware Update

Change the settings for Firmware Update.

Update Notice (Default Value: Enable)

Availability of a firmware update is notified via network.

Enable

Notify updates

Disable

Do not notify updates

Version (Default Value: -)

The current firmware version is displayed.

Update via NET (Default Value: -)

Press ENTER to select when updating the firmware via network.

•

This setting cannot be selected if you do not have Internet access or there is

no updatable firmware.

Update via USB (Default Value: -)

Press ENTER to select when updating the firmware via USB.

•

This setting cannot be selected if a USB storage device is not connected or

there is no updatable firmware in the USB storage device.

•

Wait for a while if "Firmware Update" cannot be selected. It can be selected

when the network function is activated.

Initial Setup

Make the initial setup from the setup menu.

•

Wait for a while if "Initial Setup" cannot be selected. It can be selected when

the network function is activated.

Lock

Lock the Setup menu so that the settings cannot be changed.

Setup Parameter (Default Value: Unlocked)

Lock the Setup menu so that the settings cannot be changed.

Locked

The menu is locked.

Unlocked

The menu is unlocked.

Factory Reset

All the settings are restored to factory defaults.

Factory Reset (Default Value: -)

All the settings are restored to factory defaults.

Select "Start", and press the ENTER button.

•

If "Factory Reset" is performed, your settings are restored to the default

values. Be sure to note down your setting contents beforehand.

Содержание ELITE VSX-LX505





















































































































































































































Результаты поиска

Содержание ELITE VSX-LX505

Отзывы:

Похожие инструкции для ELITE VSX-LX505

Бренды по названию

Популярные бренды

Pioneer ELITE VSX-LX505, Инструкция по эксплуатации

Результаты поиска

Содержание ELITE VSX-LX505

Отзывы:

Похожие инструкции для ELITE VSX-LX505

Бренды по названию

Популярные бренды