Pioneer ELITE VSX-LX304 Скачать руководство пользователя страница 143

Страница: 143 / 180

143

≫

≫

≫

≫

≫

≫

Works with SONOS

Change the settings to connect with the Sonos Connect.

Setting Item

Default Value

Setting Details

Input Selector

Off

Select the input selector to which the Sonos

Connect is connected.

•

Selecting "Off" disables the interlock function

with Sonos.

Connected Device

Displays the Sonos Connect connected to the

same network as the network of this unit. Press

the ENTER button to select the connected Sonos

Connect.

•

Products (e.g. Play:3 unequipped with an output

terminal) other than the Sonos Connect are also

displayed in the device list and selectable. In that

case, when playback on the Sonos side starts,

the input is switched, however, audio is not

output. Select the room name of the connected

Sonos Connect.

•

Up to 32 devices can be displayed on the Sonos

product list screen. If you cannot find the Sonos

Connect to be interlocked, return to the previous

screen, turn off the product you want to interlock,

and try again.

• To use this function, set "Input Selector"

beforehand.

Setting Item

Default Value

Setting Details

Output Zone

Main

Select the zone where you want to listen to the

music.

"Main": Outputs audio only to the main room

(where this unit is located).

"Zone 2": Outputs audio only to the separate room

(ZONE 2).

"Main/Zone 2": Outputs audio to both the main

room and separate room.

"Zone 3": Outputs audio only to the separate room

(ZONE 3).

"Main/Zone 3": Outputs audio to both the main

room and separate room (ZONE 3).

"Zone 2/Zone 3": Outputs audio to both the

separate rooms (ZONE 2 and ZONE 3).

"Main/Zone 2/Zone 3": Outputs audio to the main

room and both separate rooms (ZONE 2 and

ZONE 3).

• To use this function, set "Input Selector"

beforehand.

Preset Volume

Main:

Last

Zone 2:

Last

Zone 3:

Last

You can set the volume beforehand for playing

back the Sonos Connect.

You can set volumes

for the main room (where this unit is located) and

separate room (ZONE 2 or ZONE 3) respectively.

Select a value from "Last" (Volume level before

entering standby mode), "-∞ dB", and "-81.5 dB" to

"+18.0 dB".

• To use this function, set "Input Selector"

beforehand.

Содержание ELITE VSX-LX304





















































































































































































Результаты поиска

Содержание ELITE VSX-LX304

Отзывы:

Похожие инструкции для ELITE VSX-LX304

Бренды по названию

Популярные бренды

Pioneer ELITE VSX-LX304, Инструкция по эксплуатации

Результаты поиска

Содержание ELITE VSX-LX304

Отзывы:

Похожие инструкции для ELITE VSX-LX304

Бренды по названию

Популярные бренды