119
≫
≫
≫
≫
≫
≫
Inputting Characters
You can input characters or symbols on the keyboard displayed on the TV screen
such as when inputting a password for Wi-Fi Setup
(
p153
) or naming a
preset radio station
(
).
1.
Select a character or symbol with the cursors
/ / / on the remote
controller and press the ENTER button.
2.
When saving characters after input, select "OK" and press the ENTER button.
,
.
;
/
:
]
,
.
;
:
CLEAR
ZONE 2
SHIFT
MODE
/ / /
ENTER
•
Select "A/a" to switch between upper and lower cases. (Can also be switched
with the MODE button on the remote controller.)
• To enter a space, select " ".
• To delete a character on the left of the cursor, select " ".
• To delete all the input characters, press the CLEAR button on the remote
control.
•
On the ZONE 2 playback screen, operate the remote controller while pressing
and holding the ZONE 2 SHIFT button. To delete all the input characters, only
press the CLEAR button without pressing the ZONE 2 SHIFT button.
