The System Setup menu
06
42
En
06
Aspect
Specifies the aspect ratio when analog video input signals
are output at the HDMI OUT terminal. Make your desired
settings while checking each setting on your display (if the
image doesn’t match your monitor type, cropping or black
bands appear).
1
Select ‘Video Parameter’ from the System Setup menu.
2
Select ‘Aspect’ from the Video Parameter menu.
3
Select desired output aspect ratio.
•
THROUGH
– The input video signal is output unchanged.
•
NORMAL
– Black bands will appear either at top and
bottom or on both sides.
4
When you’re finished, press RETURN.
You return to the Video Parameter menu.
Note
• If the image doesn’t match your monitor type, adjust the
aspect ratio on the source component or on the monitor.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours.
• Default setting:
OFF
1
Select ‘Auto Power Down’ from the System Setup
menu.
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or
OFF
(if no automatic
shutoff is desired).
3
When you’re finished, press RETURN.
You return to the System Setup menu.
Note
• Turning the power off using the Auto Power Down will
apply to both the main zone and the sub zone. However, if
the
Control
at
HDMI Setup
is set to
ON
, the Auto Power
Down may not work in the sub zone.
The 12 V Trigger Setting
If the input switches over to the input function set here, a
control signal is output from the receiver’s 12 V trigger
terminal, and operations such as power coupling with other
devices and equipment can be achieved.
1
Select ‘12V Trigger’ from the System Setup menu.
2
Choose the setting of the 12 V trigger output coupling
for each input function.
3
When you’re finished, press RETURN.
You return to the System Setup menu.
5.Video Parameter
Return
a.Video Converter
b.Resolution
c.Aspect
5c.Aspect
BD
DVD
DVR/BDR
VIDEO1
VIDEO2
TV/SAT
Return
[T H RO U G H ]
[T H RO U G H ]
[ N O R M A L ]
[ N O R M A L ]
[ N O R M A L ]
NORMAL
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.1 2 V Tr i gg e r
Return
7.Auto
Power
Down
Return
OFF
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.1 2 V Tr i gg e r
Return
8 . 1 2 V Tr i gg e r
BD
DVD
DVR
VIDEO1
VIDEO2
TV/SAT
Return
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
ON
iPod
CD
CDR
TUNER
ADAPT
SIRIUS
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
VSX-40_UCSMXCN_En.book 42 ページ ２０１１年３月４日 金曜日 午前１０時２７分
