Pioneer Elite VSX-24TX, Руководство по обслуживанию

Страница: 110 / 114

110
VSX-29TX, VSX-27TX, VSX-26TX,
VSX-24TX, VSX-D908S
^
SIGNAL SELECT button
Press SIGNAL SELECT repeatedly to select one of the
following:
ANALOG : To select an analog signal.
DIGITAL : To select a digital signal (DVD/LD, TV/SAT,
CD, MD/TAPE 1, VCR 1, VCR 2).
AC-3 RF : To select an AC-3 RF signal (DVD/LD, TV/
SAT, VCR 1, VCR 2), VSX-27TX only.
AUTO : This is the default. If there are both analog and
digital input signal, the receiver automatically selects the
best possible signal (VSX-27TX only).
Press the SIGNAL SELECT and REMOTE SETUP
buttons simultaneously to switch from the SIGNAL
SELECT operation to EXTERNAL DECODER operation.
Then press the button to get the EXTERNAL DECODER
function. To get back to the SIGNAL SELECT control,
press the REMOTE SETUP button and the SIGNAL
SELECT button simultaneously once again.
&
/dts buttons
Press these buttons to put the receiver in the selected
sound mode. For more information on the modes .
*
STEREO/DIGITAL NR button
STEREO : Press this button to put the receiver into
stereo mode when it's in a different sound mode.
DIGITAL NR
:
Switches the DIGITAL NR on or off.
(
DSP button
Press repeatedly to select a DSP sound mode.
9
REMOTE SETUP button.
Use to customize the remote control functions and the
remote control itself. (See “Setting Up the Remote
Control to Control Other Components“, “Multi Operation“
.)
To access the EXTERNAL DECODER option, press the
REMOTE SETUP button and the SIGNAL SELECT
button simultaneously.
0
MIDNIGHT button
Switches the MIDNIGHT mode on or off.
-
MULTI OPERATION button
Use this button to start the MULTI OPERATION mode.
=
SYSTEM OFF button
This button turns off components in two ways. First, when
pressed it will turn off all PIONEER components.
Secondly, any component that has programmed into the
MULTI OPERATIONS settings will also be turned off.
For example : If you programmed power on for your TV
and VCR, pressing the SYSTEM OFF button will turn off
these components even if they are not PIONEER
products.
~
RECEIVER button
Press to turn power of the receiver on or to STANDBY
(off).
!
Number buttons
These buttons can perform a variety of different functions
depending on the remote operation mode. They are
most useful for CD and tuner operations.
@
ENTER/EXIT/DISC button
These buttons can perform a variety of different functions
depending on the remote operation mode.
#
MASTER VOLUME button
Use to raise or lower the volume of the receiver.
$
MUTE button
Press to mute or restore the volume.
%
FUNCTION button
Press to select a source. The button will cycle through all
the possible sources.