Pioneer Elite PureVision PRO 1410HD, Руководство по обслуживанию

Страница: 36 / 132

Alarm of fan error

FAN SET
FAN MODE
H CONT ENA –
FAN OFF/L – CONT UP –
FAN L/M – CONT TIME –
FAN M/H – UP STEP 2
FAN SAVE 075 DOWN STEP 2
PLE SAVE 070 READ TIME 60
T ALM 095 TEMP LEVEL 1
RET TME 030
PLE TIME 001
T1 030 T2 025
T3 030 T4 –
MODE 2
IC ERROR –
[MENU/ENTER] NEXT [EXIT] PREV 2/11
FAN SET
FAN MODE
ENA CONT ENA –
FAN OFF/L – CONT UP –
FAN L/M – CONT TIME –
FAN M/H – UP STEP 2
FAN SAVE 075 DOWN STEP 2
PLE SAVE 070 READ TIME 60
T ALM 095 TEMP LEVEL 1
RET TME 030
PLE TIME 001
T1 030 T2 025
T3 030 T4 –
MODE 2
IC ERROR –
[MENU/ENTER] NEXT [EXIT] PREV 2/11
NO
NO
YES
YES
NO
The FAN-A is fault.
The MAIN PWB is fault.
Blinking in green (intervals of
0.5seconds)
NO
YES
YES
The FAN-B is fault.
The fan is out of order on the
side where a 3.3Vdc output
is generated.
YES
The FAN-A/FAN-B/FAN-C is fault.
NO
(Caution) In the FAN MODE, [ENA] is automatically recovered when the main power is turned OFF → ON.
The FAN-C is fault.
YES
NO
(Caution) The FAN-C and FC
connectors are used
only for the 61XM3
Series.
The MAIN PWB
is fault.
Is the fan running?
(Caution) When alarming is
canceled, [FAN MODE] of
FAN SET (P2/11) in the
factory adjustment menu
automatically moves from
[ENA] to [H], thus causing
the fan to run.
Is there a 3.3Vdc output
at Pin
 of the FA and
FB, FC connectors?
Is there a voltage output of
11.3Vdc for PX-42XM3/XR3,
11.2Vdc for PX-50XM4/XR4, and
9.3Vdc for PX-61XM3/XR3,
respectively, when the FA
connector is disconnected and the
mains power is turned ON?
Is there a voltage output of
11.3Vdc for PX-42XM3/XR3,
11.2Vdc for PX-50XM4/XR4, and
9.3Vdc for PX-61XM3/XR3,
respectively, when the FB
connector is disconnected and the
mains power is turned ON?
Pressing the [MENU] key
of the product, turn on the
main power supply to
cancel alarming.
Turn off the main power supply.
Is there a voltage output of
11.3Vdc for PX-42XM3/XR3,
11.2Vdc for PX-50XM4/XR4, and
9.3Vdc for PX-61XM3/XR3,
respectively, when the FC
connector is disconnected and the
mains power is turned ON?
Is there a voltage output of 11.3Vdc for PX-
42XM3/XR3, 11.2Vdc for PX-50XM4/XR4, and
9.3Vdc for PX-61XM3/XR3, respectively, at Pin
1 of the FA, FB, and FC connectors?
8-4