E
1
Remove the four screw rivets.
2
Remove the front case Assy (506PE).
Front Case Assy (506PE)
3
1
1
1
1
Front case Assy (506PE)
Front case Assy (506PE)
Front case Assy (506PE)
Rear case (506)
Rear case (506)
Rear case (506)
2
-1
2
-2
When only the front case assy (506PE) is to
be removed
Note when the front case assy (506PE) is to
be reattached
The front case assy (506PE) can be removed without removing
the rear case (506) beforehand. Remove the two screws shown
below:
Be sure to align the front case assy (506PE) with the plasma
section so that the some projections (paws) on the front case assy
go through the corresponding holes in the plasma section and
they fit flush and snugly together. If not, there will be a gap.
OK
NG
58