27
<PRB1286>
Additional Features
Additional Playback Features
Playing a Disc with Skip IDs
After recording a
CD
-
R
disc, you may decide that one or more of the tracks are unwanted. This may be due to a simple
mistake or because a track didn't record successfully. Although you can't erase those tracks, you can set what are called
'skip
ID
s'. These tell a
CD
player not to play a particular track, but to skip to the next one on the disc. For more information
on setting and clearing skip
ID
s, see page 31.)
If you're not sure whether a disc has skip
ID
s programmed, look for the
SKIP
ON
indicator in the display when you load a
disc — it will light automatically if one or more are present.
1
Load a disc.
The
SKIP
ON
indicator lights if there are any skip
ID
s on the disc, and the
player is in skip play mode (in other words, it won't play those tracks that
are marked by skip
ID
s).
2
Press SKIP PLAY to switch skip play on/off, then
press
3
(play).
When you turn off skip play mode the player ignores the skip
ID
s and
plays all tracks on the disc.
❖
If there were no skip
ID
s on the disc in the first place, the
SKIP
PLAY
button has no effect.
◊ÛB
-
,/Bˆ
Digital Recording System
2
The
SKIP
ON
indicator
lights if there are skip
ID
s present on the disc.