Pioneer Elite PRB-19RW Скачать руководство пользователя страница 21

Страница: 21 / 40

Basic Playback and Recording

Automatically
Recording All Tracks from a Digital Source

If you want to copy all the tracks from another

, an

DCC

DAT

, use this mode. Like the 1-track synchro recording

mode, the recorder starts and stops automatically. When recording from

, you can play the source in either normal

play mode, or program play if you’d like the recorded tracks in a different order to the original. We do not recommend
recording from a

DAT

in program play mode — use the 1-track synchro recording mode if you want to record the tracks in a

different order.

If you are simply duplicating a source disc or tape, you’ll probably want to finalize the

–

(or

–

) after all-track sync

recording so that it’s ready to be played on other

players. To finalize the disc automatically once recording has finished,

see

Automatically Recording and Finalizing a Disc on the following page. If you're recording from a digital source other than

DCC

DAT

, see

Manually Recording from a Digital Source on page 23. If you’re recording from any source through

the analog inputs, see

Recording an Analog Source on page 24.

Load a CD–R or CD–RW disc.

Check the display to make sure that there's enough space on the disc
for what you want to record.

Set the INPUT SELECTOR to either COAXIAL or
OPTICAL.

Set to whichever input your source is connected to.

Make sure that the source is not playing, then
press DIGITAL SYNCHRO twice.

Digital synchro recording won't work if the source is already playing!

Wait for the recorder to indicate it's ready to record with a blinking

SYNC

Play the source.

The recorder starts recording automatically.

After recording all tracks on the source, the
recorder goes into record-pause mode.

After the recorder encounters about five seconds of continuous silence,
it assumes the end of the source has been reached and goes into
record-pause mode and the display shows the

SYNC

message again.

Be careful:

if the recorder detects another signal it will start recording again!

❖

The recorder will also enter record-pause mode if the digital signal is
interrupted or changes format (sampling frequency, for example).

Press

(stop) to finish recording.

❖

After pressing

(stop), the display shows

PMA

REC

while it records

the track information to the disc.

The display shows the all-track

sync mode, and the sync indicator
blinks to show that recording can
start anytime.

Press

DIGITAL

SYNCHRO

repeatedly

to change the recording mode:

Hi-bit Legato Link Conversion

1-track sync mode

All-track sync mode

Record-pause mode
(no sync)

Содержание Elite PRB-19RW









































Результаты поиска

Содержание Elite PRB-19RW

Отзывы:

Похожие инструкции для Elite PRB-19RW

Бренды по названию

Популярные бренды

Pioneer Elite PRB-19RW, Руководство по эксплуатации

Результаты поиска

Содержание Elite PRB-19RW

Отзывы:

Похожие инструкции для Elite PRB-19RW

Бренды по названию

Популярные бренды