6
1
2
3
4
1
2
3
4
C
D
F
A
B
E
DVR-541H-S
2. GENERAL INFORMATION
2.1 MODEL TYPE SETTING
When the MAIN Assy and/or TUJB Assy that are(is)
commonly used with another model are(is) replaced,
they(it) must recognize the model of this unit.
Items to be set: The model number, destination, and
region No. must be set.
• Once the setting has been made, it can never be changed. Be sure to make the setting correctly.
• As this setting resets the Assy(s) in question to the factory-preset status, it is recommended that you obtain
the customer's consent beforehand.
After power on, the following screen is displayed on
TV monitor. Press four digits properly (" 0209 ") by
using the remote control unit for service,according to
the screen information.
Disconnect then reconnect the AC power cord of the
unit. Be careful not to impart vibration to the unit
immediately after the AC power cord is disconnected.
[Procedures]
[Purposes]
[Tool to be used]
[Notes]
1
2
3
Reset the recorder to all its factory settings.
(Make sure that the recorder is on. Press and hold
7
(STOP) key and press (STANDBY/ON) key on the
front panel.)
The recorder turns off with all settings reset.
4
Press [ESC] then [DISP] keys by using the remote
control unit for servicing, and then confirm each
Model Name (" DVR-541H/RDR ").
End
5
Remote control unit for servicing
(GGF1381)
DVR-541H/RDR VERSION : 1.
∗∗
SYSCON
: RELEASE_100
Rev :1.1000
TUNERCON : 198.000
OK
DRIVE
: DVD-RW DVR-L11X
OK
1.00
OK
HDD
: WDC WD1600BB-xxJKCx
160
DEVICE
: E2R-FE 1.2 FLASH : 64M
REGION
: 4 C :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
[Recorder's Model Setting]
Input the number using the remote for Service.
> - - -
Input No. Model
[ 0208 : DVR-541H/RF ]
[ 0209 : DVR-541H/RDR ]
