Button names
Operation
11
DISP
Press to turn the information display on or off when the video is displayed.
Depending on the selected source, pressing this button can switch the dis-
play indication.
Press and hold to turn dimmer on or off.
12
BAND
/
ESC
Functions are the same as
BAND
button on the head unit.
Press to switch between media file types.
13
Move the thumb pad
(Only in DVD source)
Use to select a menu on the DVD menu.
Click the thumb pad
Click to display the disc title list, track title list, folder list or file list depend-
ing on the source.
(Only in DVD source)
Click
ENTER
to select a menu on the DVD menu.
14
MENU
(Only in DVD source)
Press to display the DVD menu during DVD playback.
TOP MENU
(Only in DVD source)
Press to return to the top menu during DVD playback.
Display indication
1
8
7
3 5
2
4
6
Indicator
State
1
Main dis-
play sec-
tion
!
Tuner: band and frequency
!
RDS: program service
name, PTY information and
other literal information
!
Built-in DVD player and
USB: elapsed playback
time and literal information
2
(list)
The list function is being oper-
ated.
3
LOC
Local seek tuning is on.
4
(TA)
TA function is on.
5
(TP)
A TP station is tuned in.
6
(re-
peat)
Track or folder repeat is on.
Indicator
State
7
(ran-
dom)
Random play is on.
8
(sound re-
triever)
The sound retriever function is
on.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
Important
New settings will not take effect until you finish
making changes on the setup menu.
1
After installation of this unit, turn the
ignition switch to ON.
SET UP
appears.
2
Turn M.C. to switch to YES.
#
If you do not operate for 30 seconds, the set up
menu will not be displayed.
#
If you prefer not to set up at this time, turn
M.C.
to switch to
NO
.
If you select
NO
, you cannot set up in the set up
menu.
3
Press M.C. to select.
4
Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET
(setting the clock)
1
Turn
M.C.
to adjust hour.
2
Press
M.C.
to select minute.
3
Turn
M.C.
to adjust minute.
4
Press
M.C.
to confirm the selection.
FM STEP
(FM tuning step)
The FM tuning step employed by seek tuning can
be switched between 100 kHz, the preset step,
and 50 kHz.
!
The tuning step remains at 50 kHz during man-
ual tuning.
1
Turn
M.C.
to select the FM tuning step.
50
(50 kHz)
—
100
(100 kHz)
2
Press
M.C.
to confirm the selection.
AM STEP
(AM tuning step)
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When using the
tuner in North, Central or South America, reset
the tuning step from 9 kHz (531 kHz to 1 602 kHz al-
lowable) to 10 kHz (530 kHz to 1 640 kHz allowable).
1
Turn
M.C.
to select the AM tuning step.
9
(9 kHz)
—
10
(10 kHz)
2
Press
M.C.
to confirm the selection.
DEMO
(demo display setting)
1
Turn
M.C.
to set the demo display to on or off.
2
Press
M.C.
to confirm the selection.
QUIT
appears.
5
To finish your settings, turn M.C. to select
YES.
#
If you prefer to change your setting again, turn
M.C.
to switch to
NO
.
6
Press M.C. to select.
English
Operating this unit
5
Section
Operating this unit
En
02
