128
DRM-7000, DRM-AF751, DRM-AL751, DRM-AH721, DRM-PW701
Entering Test Mode
Specifications of Demo mode
(1) After the power is turned on and the initialization of the mecha-
nism ("Initializing" is displayed) is completed, the following
indication is displayed.
(2) Unlock the keys and press the FUNCTION key.
The following indication is displayed:
(3) Press the FUNCTION and
±=
keys simultaneously for 4
seconds. The following indication is displayed:
The unit is in User mode.
(1) Move the cursor to Demo by pressing the
±
key, then press
the ENT key to display the Demo Mode Select screen.
Select Demo 1, 2 or 3 mode by pressing the
±=
or
+≠
key.
(2) Press the ENT key to enter the demo mode you have selected.
Preparation :
Set 16 discs each into Hyper magazines #1-16 (from the lowest
to the 16th slots).
Operational steps :
(1) The disc in Hyper magazine #1 is carried and inserted into
the rear Bay #1 drive unit.
(2) The disc in Hyper magazine #2 is carried and inserted into
the rear BAY #2 drive unit.
(16) The disc in Hyper magazine #16 is carried and inserted into
the rear Bay #16 drive unit.
(17) All the transferred discs start rotating. Demo 1 completed.
In this mode, a disc is carried
to the drive unit, the drive unit
is started, then stops.
Discs must be set in Hyper
magazines #1 to #16.
Demo 1
The unit enters System
management mode.
Asking if you wish to enter Test
mode.
(4) Press the ENT key. The following indication is displayed:
(5) Move the cursor to the mode of your choice by pressing the
±=
or
+≠
key, then press the ENT key.
The unit enters Test mode.
The cursor is blinking on D (Diag).
To Manual/Auto mode
Diag mode
Robotics
Individually
(Elevation Manual/Auto operation mode)
• Elevation Manual/Auto
OK
To Step mode
Collectively
To Drive mode
Drive
To Sensor mode
Sensor
In this mode, two discs are
carried one after another to
one drive unit.
Two discs are required.
Demo 2
In this mode, discs are carried
to all magazines installed, one
after another.
Discs must be set in Hyper
magazines #1 to #4.
A disc is being
carried to the drive
unit.
Note: If a drive unit is not installed at the rear Bay, the disc is
carried to the location where the specified drive unit should
be installed then returned to the original Hyper magazine.
Operation completed.
Operation completed.
Demo 3
Demo 1
Indications :
±=
+≠
(Loading Manual/Auto operation mode)
• Loading Manual/Auto
(Flip-unit Manual/Auto operation mode)
• Flip-unit Manual/Auto
(Clamper Manual/Auto operation mode)
• Clamper Manual/Auto
(Mailslot Manual/Auto operation mode)
• Mailslot Manual/Auto
(Hyper magazine Manual/Auto operation
mode)
• Hyper-Mag. Manual/Auto
±=
+≠
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 TEST MODE
Содержание DRM-7000
Страница 65: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 65 A B C D 5 6 7 8 5 6 7 8 CN501 T CN306 CN305 CN304 S ...
Страница 67: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 67 A B C D 5 6 7 8 5 6 7 8 CN301 U CN504 CN505 CN506 T ...
Страница 69: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 69 A B C D 5 6 7 8 5 6 7 8 CN501 V CN306 CN305 CN304 U ...
Страница 71: ...DRM 7000 DRM AF751 DRM AL751 DRM AH721 DRM PW701 71 A B C D 5 6 7 8 5 6 7 8 CN504 CN505 V ...