manualshive.com logo in svg

Pioneer DR-706S, Справочное руководство

Pioneer DR-706S - профессиональный CD-плеер с возможностью записи. На нашем сайте вы можете бесплатно скачать руководство пользователя для этой модели. Нет необходимости искать в интернете - просто загрузите Reference Manual с manualshive.com. Удобно, бесплатно и надежно.

Поделиться
Скачать
background image

CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C)

- 40 -

T

ABLE 

2-9-1B E

RROR 

R

ECOVERY 

D

ESCRIPTIONS

Value

Description

00h

The maximum error recovery procedures available are used. If an error occurs which
is uncorrectable with the error correction codes (ECC) on the media, data transfer is
terminated with Check Condition status. The block with the error is not transferred.
The sense key is set to Medium Error. The information bytes give the address of the
block where the unrecovered error was detected. Recovered errors are not reported.

01h

Only retries of the read operation and CIRC are used (layered error correction is not
used). Only CIRC unrecovered data errors are reported. If a CIRC unrecovered data
error occurs, data transfer is terminated with Check Condition status. The block with
the error is not transferred. The sense key is set to Medium Error. The information
bytes give the address of the block where the unrecovered error was detected.
Recovered errors are not reported.

04h

The maximum error recovery procedures available are used. Recovered data errors
are reported. If a recovered data error occurs, data transfer is not terminated.
However, when the data transfer has completed Check Condition status is reported.
The sense key is set to Recovered Error. The information bytes give the address of
the last block where a recovered data error was detected. If a data error occurs which
is uncorrectable with the ECC information available on the media, data transfer is
terminated and Check Condition status is reported. The block with the error is not
transferred. The sense key is set to Medium Error. The information bytes give the
address of the block where the uncorrectable error was detected.

05h

Only retries of the read operation and CIRC are used (layer error correction is not
used). Recovered data errors are reported. If a recovered data error occurs, data
transfer is not terminated. However, when the data transfer has completed Check
Condition status is reported. The sense key is set to Recovered Error. The information
bytes five the address of the last block where a CIRC recovered data error was
detected. If an unrecovered data error occurs data transfer is terminated and Check
Condition status is reported. The block with the error is not transferred. The sense key
is set to Medium Error. the information bytes give the address of the block where the
unrecovered error was detected.

06h

The maximum error recovery procedures are sued. Recovered data errors are
reported. If a recovered data error occurs data transfer is terminated and Check
Condition status is reported. The block with the recovered error is not transferred.
The sense key is set to Recovered Error. the information bytes give the address of the
block where the recovered data was detected. if a data error occurs which is
uncorrectable with the ECC information on the medium, data transfer is terminated
with Check Condition status. The block with the error is not transferred. The sense
key is set to Medium Error. The information bytes give the address of the block
where the uncorrectable error was detected.

07h

Only retries of the read operation are used (layer error correction is not used). CIRC
recovered data errors are reported. If a CIRC recovered data error occurs, data
transfer is terminated with Check Condition status. The block with the recovered
error is not transferred. The sense key is set to Recovered Error. The information
bytes five the address of the block where the recovered data error was detected. If a
CIRC unrecovered data error occurs, data transfer is terminated with Check
Condition status. The block with the error is not transferred. The sense key is set to
Medium Error. The information bytes give the address of the block where the
unrecovered error was detected.

continued on next page

Содержание DR-706S






























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DR-706S

TechniSat MultyFocus Operating Instructions Manual preview
MultyFocus
Бренд: TechniSat Страницы: 48
Digital View VIEWSTREAM 100 Manual preview
VIEWSTREAM 100
Бренд: Digital View Страницы: 11
Sylvania SMP2002 Specification Sheet preview
SMP2002
Бренд: Sylvania Страницы: 1
Xoro HBD 1000 User Manual preview
HBD 1000
Бренд: Xoro Страницы: 122
Medialon MIP HD User Manual preview
MIP HD
Бренд: Medialon Страницы: 96
Musical Fidelity M2SCD Manual preview
M2SCD
Бренд: Musical Fidelity Страницы: 18
Oakcastle DVD100 User Manual preview
DVD100
Бренд: Oakcastle Страницы: 20
Denon DVD-756 Specifications preview
DVD-756
Бренд: Denon Страницы: 2
NAIM Uniti Nova Quick Start Manual preview
Uniti Nova
Бренд: NAIM Страницы: 12
Aiwa HS-PS11 Service Manual preview
HS-PS11
Бренд: Aiwa Страницы: 8
Haier HHS1A-2G User Manual preview
HHS1A-2G
Бренд: Haier Страницы: 28
Haier HHH1A-2G User Manual preview
HHH1A-2G
Бренд: Haier Страницы: 64
Lenoxx Fashion Miss 8980-FM User Manual preview
Fashion Miss 8980-FM
Бренд: Lenoxx Страницы: 4
AEG MMS 4206 Instruction Manual & Guarantee preview
MMS 4206
Бренд: AEG Страницы: 18
AEG MMS 4210 Instruction Manual preview
MMS 4210
Бренд: AEG Страницы: 24
AEG SR 4336 CD/MP3 Instruction Manual preview
SR 4336 CD/MP3
Бренд: AEG Страницы: 62
AEG SR 4328 CD/MP3 Instruction Manual preview
SR 4328 CD/MP3
Бренд: AEG Страницы: 58
Black & Decker KW750 Original Instructions Manual preview
KW750
Бренд: Black & Decker Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды