En
g
lis
h
- 73 -
If you have problems operating this
product, refer to this section. The most
common problems are listed below, along
with likely causes and solutions. If a
solution to your problem cannot be found
here, contact your dealer or the nearest
authorised Pioneer service facility.
A black screen is displayed, and
operation is not possible using the touch
panel keys.
→
[Power OFF] mode is on.
– Press any button on this product to
release the mode.
The screen is covered by a caution
message and the video cannot be shown.
→
The handbrake lead is not connected or
the handbrake is not applied.
– Connect the handbrake lead correctly,
and apply the handbrake.
→
The handbrake interlock is activated.
– Park your vehicle in a safe place and
apply the handbrake.
No video output from the connected
equipment.
→
The [AV Input] or [AUX Input] setting is
incorrect.
– Correct the settings.
The audio or video skips.
→
This product is not firmly secured.
– Secure this product firmly.
No sounds are produced. The volume
level will not rise.
→
Cables are not connected correctly.
– Connect the cables correctly.
The icon
is displayed, and operation is
impossible.
→
The operation is not compatible with
the video configuration.
Random playback in Music Browse mode
is released in the USB storage device.
→
Random playback in Music Browse
mode is cancelled after the ignition
switch is turned off (ACC OFF).
– Switch to Music Browse mode again
and turn on random playback.
The picture is stretched, with an incorrect
aspect ratio.
→
The aspect setting is incorrect for the
display.
– Select the appropriate setting for that
image.
iPod cannot be operated.
→
The iPod is frozen.
– Reconnect the iPod with the USB
interface cable for iPod/iPhone.
– Update the iPod software version.
→
An error has occurred.
– Reconnect the iPod with the USB
interface cable for iPod/iPhone.
– Park your vehicle in a safe place, and
then turn off the ignition switch (ACC
OFF). Subsequently, turn the ignition
switch to on (ACC ON) again.
– Update the iPod software version.
→
Cables are not connected correctly.
– Connect the cables correctly.
Appendix
Troubleshooting
Common problems
Problems with the AV screen