Pioneer DEH-X7600HD, Руководство пользователя

Страница: 5 / 112

Black plate (5,1)
1
Turn M.C. to change the year.
2
Press M.C. to select day.
3
Turn
M.C.
to change the day.
4
Press
M.C.
to select month.
5
Turn M.C. to change the month.
6
Press M.C. to confirm the selection.
Clock Setting (setting the clock)
1
Turn M.C. to adjust hour.
2
Press M.C. to select minute.
3
Turn M.C. to adjust minute.
4
Press M.C. to select time notation.
5
Turn M.C. to select the desired setting.
12H (12-hour clock)
—
24H (24-hour clock)
6
Press
M.C.
to confirm the selection.
Contrast (display contrast setting)
1
Turn
M.C.
to adjust the contrast level.
0 to 15 is displayed as the level is increased or
decreased.
2
Press M.C. to confirm the selection.
Quit appears.
5 To finish your settings, turn M.C. to select
YES.
#
If you prefer to change your setting again, turn
M.C. to switch to NO .
6 Press M.C. to select.
Notes
!
You can set up the menu options from the
system menu. For details about the settings,
refer to
System menu on page 19.
!
You can cancel set up menu by pressing
SRC / OFF .
Attaching the front panel
Important
!
Handle the front panel with care when re-
moving or attaching it.
!
Avoid subjecting the front panel to excessive
shock.
!
Keep the front panel out of direct sunlight
and high temperatures.
!
To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
DEH-X9600BHS
Removing the front panel
1
Press the open button to open the front panel.
2
Grip the left side of the front panel and pull it
gently outward.
Take care not to grip it too tightly or to drop the
front panel and protect it from contact with
water or other fluids to prevent permanent
damage.
3
Always store the detached front panel in a pro-
tective case or bag.
Re-attaching the front panel
1
Reattach the front panel by holding it upright
to the unit and clipping it securely into the
mounting hooks.
DEH-X8600BH/DEH-X7600HD/DEH-
X8600BS/DEH-X7600S
Removing the front panel
1
Press the detach button to release the front
panel.
2
Push the front panel upward (
M
) and then pull
it toward (
N
) you.
3
Always store the detached front panel in a pro-
tective case or bag.
Re-attaching the front panel
1
Slide the front panel to the left.
2
Press the right side of the front panel until it is
firmly seated.
Forcing the front panel into place may result in
damage to the front panel or head unit.
Basic operations
Turning the unit on
1
Press SRC / OFF to turn the unit on.
Turning the unit off
1
Press and hold SRC / OFF until the unit turns
off.
Adjusting the volume
1
Turn M.C. to adjust the volume.
Selecting a source
1
Press SRC / OFF to cycle between:
DEH-X9600BHS
SiriusXM
—
HD Radio
—
CD
—
USB1 / iPod1
—
Pandora1
—
App 1 (application1)
—
USB2 /
iPod2
—
Pandora2
—
App 2
(application2)
—
AUX
—
BT Audio
DEH-X8600BH
HD Radio
—
CD
—
USB / iPod
—
Pandora
—
App
(application)
—
AUX
—
BT Audio
DEH-X7600HD
HD Radio
—
CD
—
USB / iPod
—
Pandora
—
App
(application)
—
AUX
DEH-X8600BS
SiriusXM
—
Radio
—
CD
—
USB / iPod
—
Pandora
—
App (application)
—
AUX
—
BT
Audio
DEH-X7600S
SiriusXM
—
Radio
—
CD
—
USB / iPod
—
Pandora
—
App (application)
—
AUX
Notes
!
When there is an iPod connected and a
source other than
App is selected, you can
switch to App by pressing APP .
!
When this unit
’
s blue/white lead is con-
nected to the vehicle
’
s auto-antenna relay
control terminal, the vehicle
’
s antenna ex-
tends when this unit
’
s source is turned on.
To retract the antenna, turn the source off.
!
When there are two USB storage devices
connected to this unit and you want to
switch between them for playback, discon-
nect communications for the USB storage
device first before proceeding.
!
If connecting both
USB1
/
iPod1
and
USB2
/
iPod2 at the same time, use a Pioneer USB
cable (CD-U50E) in addition to the regular
Pioneer USB cable.
English
Using this unit
5
Section
Using this unit
En
02
<QRD3228-A>5