Pioneer DEH-x6500dab, Руководство пользователя

Страница: 10 / 152

SUB.W (subwoofer on/off setting)
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Press M.C. to select the desired setting.
NOR
(normal phase)
—
REV
(reverse phase)
—
OFF (subwoofer off)
SUB.W CTRL (subwoofer adjustment)
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
1
Press
M.C.
to display the setting mode.
2
Press M.C. to cycle between the following:
Cut-off frequency
—
Output level
—
Slope level
Rates that can be adjusted will flash.
3
Turn
M.C.
to select the desired setting.
Cut-off frequency: 50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Output level:
–
24 to +6
Slope level:
–
6
— –
12
BASS BOOST (bass boost)
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select a desired level.
0 to +6 is displayed as the level is increased or
decreased.
HPF SETTING (high pass filter adjustment)
When you do not want low sounds from the sub-
woofer output frequency range to play from the
front or rear speakers, turn on the HPF (high pass
filter). Only frequencies higher than those in the
selected range are output from the front or rear
speakers.
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between the following:
Cut-off frequency
—
Slope level
3
Turn M.C. to select the desired setting.
Cut-off frequency: OFF
—
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Slope level:
–
6
— –
12
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the
volume level of each source to prevent radical
changes in volume when switching between sour-
ces.
!
Settings are based on the FM volume level,
which remains unchanged.
!
The MW/LW volume level can also be adjusted
with this function.
!
When selecting FM as the source, you cannot
switch to
SLA .
!
USB and iPod are all set to the same setting
automatically.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to adjust the source volume.
Adjustment range: +4 to
–
4
System menu
Important
PW SAVE (power saving) is canceled if the ve-
hicle battery is disconnected and will need to be
turned back on once the battery is reconnected.
When
PW SAVE
(power saving) is off, depend-
ing on connection methods, the unit may con-
tinue to draw power from the battery if your
vehicle
’
s ignition doesn
’
t have an ACC (acces-
sory) position.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to select the system menu
function.
Once selected, the following system menu func-
tions can be adjusted.
LANGUAGE (multi-language)
This unit can display the text information from a
compressed audio file even for information em-
bedded in English or Russian.
!
If the embedded language and the selected
language setting are not the same, text infor-
mation may not display properly.
!
Some characters may not be displayed prop-
erly.
1
Turn M.C. to select the desired setting.
ENG
(English)
— РУС
(Russian)
CLOCK SET
(setting the clock)
1
Press M.C. to display the setting mode.
2
Press M.C. to select the segment of the clock
display you wish to set.
Hour
—
Minute
3
Turn
M.C.
to adjust the clock.
12H/24H (time notation)
1
Press M.C. to select the desired setting.
12H (12-hour clock)
—
24H (24-hour clock)
INFO DISPLAY
(sub information)
The type of text information displayed in the sub
information section can be toggled.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
SPEANA
—
LEVEL METER
—
SOURCE
—
CLOCK
—
OFF
!
The signal bar indicator displays for SPEANA
or LEVEL METER when the source is set to
DAB or TUNER .
AUTO PI (auto PI seek)
The unit can automatically search for a different
station with the same programming, even during
preset recall.
1
Press M.C. to turn Auto PI seek on or off.
AUX (auxiliary input)
Activate this setting when using an auxiliary de-
vice connected to this unit.
1
Press
M.C.
to turn
AUX
on or off.
MUTE MODE (mute mode)
Sound from this system is automatically muted or
attenuated when a signal from equipment with a
mute function is received.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
!
MUTE
–
Muting
!
20dB ATT
–
Attenuation ( 20dB ATT has a
stronger effect than 10dB ATT )
!
10dB ATT
–
Attenuation
PW SAVE (power saving)
Switching this function on enables you to reduce
the consumption of battery power.
!
Turning on the source is the only operation al-
lowed when this function is on.
1
Press
M.C.
to turn the power save on or off.
Selecting the key color
You can select desired colors for the keys of this
unit.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press to
select.
3 Turn M.C. to display KEY COLOUR and
press to select.
4 Turn M.C. to select the illumination color.
You can select any one of the options in the fol-
lowing list:
!
Preset colors (ranging from WHITE to ROSE )
!
SCAN (cycle through all colors)
Operating this unit
10
Section
Operating this unit
En
02