Pioneer DEH-P9400BH, Руководство пользователя

Страница: 11 / 96

Selecting and playing the
QuickMix/station list
1 Press (list) to switch to the QuickMix/
station list mode.
2 Use M.C. to select the QuickMix or de-
sired station.
Changing the sort order
1
Press (list).
!
ABC
–
You can sort the items in the list alpha-
betically
!
DATE
–
You can sort the items in the list in
order of the dates on which the items were
created
Changing QuickMix or stations
1
Turn M.C.
Playing
1
When QuickMix or the station is selected,
press
M.C.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Bookmark (bookmark)
1
Press M.C. to store track information.
Pause (pause)
1
Press M.C. to pause or resume.
Sound Retriever (sound retriever)
1
Press M.C. to select the desired setting.
1
—
2
—
OFF
(off)
1 is effective for low compression rates, and 2
is effective for high compression rates.
Audio adjustments
1
1
Audio display
Shows the audio adjustment status.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
Fader/Balance (fader/balance adjustment)
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between fader (front/rear)
and balance (left/right).
3
Turn M.C. to adjust the front/rear speaker bal-
ance.
!
The front/rear speaker balance cannot be
adjusted when the rear output setting is
Rear SP :S/W
. Refer to
S/W control
(rear
output and subwoofer setting) on page 15.
4
Turn M.C. to adjust the left/right speaker bal-
ance.
Preset EQ (equalizer recall)
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select an equalizer curve.
Powerful
—
Natural
—
Vocal
—
Custom1
—
Cus-
tom2
—
Flat
—
Super bass
G.EQ (equalizer adjustment)
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer curve
settings are stored in
Custom1 or Custom2 .
!
A separate Custom1 curve can be created for
each source. If you make adjustments when a
curve other than
Custom2 is selected, the
equalizer curve settings will be stored in Cus-
tom1 .
!
A Custom2 curve that is common for all sour-
ces can be created. If you make adjustments
when the
Custom2 curve is selected, the Cus-
tom2 curve will be updated.
1
Recall the equalizer curve you want to adjust.
2
Press M.C. to display the setting mode.
3
Press
M.C.
to cycle between equalizer band
and level.
4
Turn M.C. to select the equalizer band to ad-
just.
100Hz
—
315Hz
—
1.25kHz
—
3.15kHz
—
8kHz
Turn
M.C.
to adjust the equalizer curve.
+6 to
–
6 is displayed as the equalizer curve is
increased or decreased.
Loudness (loudness)
Loudness compensates for deficiencies in the low-
frequency and high-frequency ranges at low vol-
ume.
1
Press M.C. to display the setting mode.
2
Press M.C. to turn loudness on or off.
3
Turn
M.C.
to select the desired setting.
Low (low)
—
Mid (mid)
—
High (high)
Subwoofer1
(subwoofer on/off setting)
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Press
M.C.
to display the setting mode.
2
Press
M.C.
to turn subwoofer output on or off.
3
Turn M.C. to select the phase for the sub-
woofer output.
Turn
M.C. to the left to select reverse phase,
and
Reverse
appears in the display. Turn
M.C.
to the right to select normal phase, and Nor-
mal appears in the display.
Subwoofer2 (subwoofer adjustment)
The cut-off frequency and output level can be ad-
justed when the subwoofer output is on.
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
1
Press M.C. to display the setting mode.
2
Press
M.C.
to cycle between the cut-off fre-
quency and the output level for the subwoofer.
3
Turn M.C. to select the cut-off frequency.
50Hz
—
63Hz
—
80Hz
—
100Hz
—
125Hz
4
Turn M.C. to adjust the output level for the sub-
woofer.
The subwoofer level increases or decreases
each time you turn
M.C. +6 to
–
24 is displayed
as the level is increased or decreased.
Bass Booster (bass boost)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select a desired level.
0
to
+6
is displayed as the level is increased or
decreased.
HPF
(high pass filter adjustment)
English
Operating this unit
11
Section
Operating this unit
En
02