Black plate (10,1)
<YRD5039-A/N>10
Listening to the radio
4
1
2
3
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1
Band indicator
Shows which band the radio is tuned to, AM
or FM.
2
Frequency indicator
Shows the frequency to which the tuner is
tuned.
3
Preset number indicator
Shows which preset has been selected.
4
Stereo (
5
) indicator
Shows when the selected frequency is
being broadcast in stereo.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
TUNER
dis-
played.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 Press BAND to select a band.
Press
BAND
until the desired band (
FM1
,
FM2
,
FM3
for FM or
AM
) is displayed.
4 To perform manual tuning, briefly press
c
or
d
.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
c
or
d
.
#
If you press and hold
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Note
When the frequency selected is being broadcast
in stereo the stereo (
5
) indicator will light.
Tuner
En
10
Section
04
Содержание DEH-P4850MP
Страница 145: ...Black plate 145 1 YRD5039 A N 145 Ptbr 145 Português B ...
Страница 146: ...Black plate 146 1 YRD5039 A N 146 Ptbr 146 ...
Страница 147: ...Black plate 147 1 YRD5039 A N 147 Ptbr 147 Português B ...