Pioneer DEH-4090MP, Руководство пользователя

Страница: 16 / 34

Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’
s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
POWERFUL Powerful
NATURAL Natural
VOCAL
Vocal
CUSTOM
Custom
FLAT Flat
SUPER BASS Super bass
!
CUSTOM is an adjusted equalizer curve
that you create. If you make adjustments to
an equalizer curve, the equalizer curve set-
ting is memorized in
CUSTOM .
!
When
FLAT
is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
1 Use MULTI-CONTROL to select
PRESET EQUALIZER.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select the
equalizer.
#
You can also perform the same operations by
pushing MULTI-CONTROL up or down.
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of
FLAT , can be adjusted to a fine
degree (nuance control).
1 Use MULTI-CONTROL to select
EQ SETTING 1.
2 Press MULTI-CONTROL to display the
setting mode.
3 Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press MULTI-CONTROL repeatedly to switch
the segment in the following order:
L
(low)
—
M
(mid)
—
H
(high)
4 Turn MULTI-CONTROL to adjust the
level of the equalization band.
+6
to
–
6 is displayed as the level is increased
or decreased.
#
You can also perform the same operations by
pushing MULTI-CONTROL up or down.
#
You can then select another band and adjust
the level.
#
The equalizer curve with all frequencies set to
0 cannot be adjusted.
Note
A separate CUSTOM curve can be created for
each source. If you make adjustments, the equali-
zer curve settings will be memorized in
CUSTOM
.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
LOW
/
MID
/
HI
).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1 Use MULTI-CONTROL to select
EQ SETTING 2.
2 Press MULTI-CONTROL to display the
setting mode.
Audio Adjustments
En
16
Section
03