CT-S670D
41
System ..................................................... 4-track, 2-channel stereo
Heads ................................. Combined Hard permalloy recording/
Hard Permalloy playback head x 1
“Ferrite” erasing head x 1
Motor .................................................. DC servo capstan motor x 1
DC servo reel motor x 1
DC servo motor x 1
Wow and Flutter ..................... No more than 0.05% (WRMS, JIS)
No more than ±0.14% (DIN)
Fast Winding Time .......... Approximately 90 seconds (C-60 tape)
Frequency Response
–20 dB recording:
TYPE IV (Metal) tape .................................. 20 to 21,000 Hz ±6dB
TYPE II (High/CrO
2
) tape ............................ 20 to 20,000 Hz ±6dB
TYPE I (Normal) tape ................................ 20 to 20,000 Hz ±6dB
Signal-to-Noise Ratio ........................................... More than 60 dB
Digital-NR ON (Dolby-NR OFF) ......................... More than 82 dB
Digital-NR ON (Dolby-NR B or C type ON) ............. More than 90 dB
(TYPE I tape, 3rd distortion 3%, IEC, DIN AUDIO)
Harmonic Distortion ........................................ No more than 0.6%
(at -4dB: 160 nwb/m)
Input ....................................................................... RCA pin-jack x 2
LINE (INPUT) ............................. 100 mV (Input impedance 23 k
Ω
)
Output
LINE (OUTPUT) ......................... 0.5 V (Output impedance 1.2 k
Ω
)
Headphones .............................. 1.33 mW (Load impedance 32
Ω
)
Miscellaneous
Power Requirements ................................. AC 220-230 V, 50/60 Hz
Power Consumption ................................................................. 23 W
Dimensions ...................................... 420(W) x 128(H) x 277(D) mm
Weight (without package) ....................................................... 4.5kg
Subfunctions
÷
DOLBY HX PRO system
÷
DOLBY B/C type NR systems
÷
Music search up to ±15 selections
÷
DIGITAL/CD•DECK SYNCHRO recording capability
÷
Peak level meter with peak-hold function
÷
Automatic space recording mute
÷
Automatic tape selector
÷
3-mode electronic 4-digit tape counter (TAPE/TIME/REMAIN)
÷
Headphone jack
÷
DIGITAL FLEX system (Frequency Level Expander)
÷
DIGITAL SUPER AUTO BLE XD system
÷
LAST MEMORY
÷
DIGITAL NR
÷
Legato Link Conversion
÷
Power Eject
÷
DIGITAL SYNCHRO recording capability
÷
MPX filter (Interlocks with DOLBY NR)
÷
TIMER Recording/Playback start
÷
Display off
÷
Repeat playback
Accessories
Operating instructions ................................................................... 1
Connection cord with pin plugs .................................................... 2
CD•DECK SYNCHRO control cord ................................................. 1
Warranty card ................................................................................. 1
NOTE:
Specifications and design subject to possible modifications with-
out notice, due to improvements.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your hands
are wet as this could cause a short circuit or electric shock. Do
not place the unit, a piece of furniture, etc., on the power cord, or
pinch the cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they are not
likely to be stepped on. A damaged power cord can cause a fire
or give you an electrical shock. Check the power cord once in a
while. When you find it damaged, ask your nearest PIONEER au-
thorized service center or your dealer for a replacement.
SPECIFICATIONS
Содержание CT-S670D
Страница 15: ...CT S670D 15 A B C D 5 6 7 8 5 6 7 8 A 3 4 RAM X TAL VCO X TAL DIR X1731 18 432 MHz A 2 4 ...
Страница 24: ...CT S670D 24 A B C D 1 2 3 4 1 2 3 4 A MAIN UNIT IC1801 IC1751 IC1701 A ...
Страница 25: ...CT S670D 25 A B C D 5 6 7 8 5 6 7 8 A SIDE B RNP1725 A IC1741 IC1761 IC1802 IC1851 IC1731 IC501 IC551 ...
Страница 39: ...CT S670D 39 PLAYBACK SIGNAL RECORDING SIGNAL M5M51008B FL 70L IC 751 TC4052BP DIGITAL IN 7 3 BLOCK DIAGRAM ...
