Pioneer CDX-MG6036ZH страница 52 Скачать руководство пользователя

Страница: 52 / 63

CDX-MG6036ZH

Operating Procedures for Ejecting a Clamped Disc

Select CAMMOTOR using [1], then press the REV direction while the disc is being clamped (CAMSW state is 32).

The CAMSW status indication sequentially changes through 32

→

22.

When the disc to be ejected is not identical with the disc being clamped, select the [2] ELVMOTOR in the vicinity of where

the display changes from 22 to 20, then match the elevation to the disc to be ejected according to the following procedures:

After selecting ELVMOTOR, lower the elevation until the ELV position display becomes 01 (1st disc) using the REV direction.

Drive the elevation up until the display is changed to 10. This is the elevation where the second disk is situated.

The next display of 10 tells you the elevation of the 3rd disc. Repeating this operation allows you to establish an elevation

matching each disc. (When the elevation is driven from the 1st through 6th disc, the status display changes as

→

10.)

(When the disc to be ejected coincides with the disc being clamped, the above operations are not necessary.)

Select the [1] CAMMOTOR and then, using the REV direction, drive it until the display changes from 20 (or 22) to 21 and 31.

Select the [2] ELVMOTOR, then drive the tray of the disc to be ejected up to the EJECT/LOAD position (using the FWD direction).

Select the [4] CAM+LOADMOTOR, then drive it in the REV direction until the display changes from 31 to 30 and 10.

The door will open immediately before the display changes to 10 and part of the disc will be pushed out.

When 10 is displayed, select the [3] LOADMOTOR, then drive it in REV direction until the disc is completely ejected.

Содержание CDX-MG6036ZH
































































Результаты поиска

Содержание CDX-MG6036ZH

Отзывы:

Похожие инструкции для CDX-MG6036ZH

Бренды по названию

Популярные бренды

Pioneer CDX-MG6036ZH, Руководство по обслуживанию

Результаты поиска

Содержание CDX-MG6036ZH

Отзывы:

Похожие инструкции для CDX-MG6036ZH

Бренды по названию

Популярные бренды