Registering connected
cellular phone
You can register a phone that is temporarily
connected to this unit in order to take full ad-
vantage of the features available with Blue-
tooth wireless technology. Only one cellular
phone can be registered.
1
Put the unit in REGIST mode
Refer to
Function compatibility charts
on page
26.
Before you put the unit in
REGIST
mode
TEL
is
displayed.
2
Use cellular phone to register to this
unit.
When the registration is completed,
TEL REG.
is displayed.
#
Operation varies depending on the type of
your cellular phone. Refer to the instruction man-
ual that came with your cellular phone for de-
tailed instructions.
#
You may need to enter the link code on your
cellular phone to complete the connection.
Disconnecting a cellular phone
When you are done using your phone with this
unit, you can close the Bluetooth wireless con-
nection.
%
Put the unit in DISCONN. mode
Refer to
Function compatibility charts
on page
26.
After the disconnection is completed,
NO TEL
is displayed.
Voice recognition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
!
Operation varies depending on the type of
your cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
!
This function can be operated only when
the connection is established with HFP
(Hands Free Profile).
1
Put the unit in VOICE ON mode.
2
Pronounce the name of your contact.
Setting the automatic
answering
If this function is on, this unit automatically
answers all incoming calls.
%
Turn the automatic answering on or off
Refer to
Function compatibility charts
on page
26.
The status will be displayed (e.g.,
ANSW ON
).
Operating with different
head units
En
31
English
Section
05
