background image

Installation manual CA-HM-UNI-EVO.007 | Version 1.0

EN - Installation Manual

Open locking mechanism

Metal cage

Unit support

Screen support

Unit cover

Small hardware

Screen connector cover

Screen neck

Screen cover

Left& right support brackets installed

Mount side support bracket with the hardware 

supplied (included with the installation kit)

Mount unit support to the side brackets 

using the supplied hexagonal bolds

(included with the installation kit)

1

2

4

3

CA-HM-UNI-EVO.007

INSTALLATION KIT FOR SPH-EVO93DAB

Содержание CA-HM-UNI-EVO.007

Страница 1: ...hardware Screen connector cover Screen neck Screen cover Left right support brackets installed Mount side support bracket with the hardware supplied included with the installation kit Mount unit support to the side brackets using the supplied hexagonal bolds included with the installation kit 1 2 4 3 CA HM UNI EVO 007 INSTALLATION KIT FOR SPH EVO93DAB ...

Страница 2: ...the two center screws on each side included with SPH EVO82DAB Install sliding mecha using the shown hardware included with the installation kit Lock the unit support into the metal cage by opening the two metal tabs and tighten the indicated screws on both sides Mount screen cover onto the screen support using the remaining four screws as indicated included with SPH EVO82DAB 5 6 8 10 7 9 ...

Страница 3: ...h using some tape and extension cable CD RGB150E not included Completely inserted screen neck Slide the screen neck into the unit cover pay attention to the positioning of the tabs Slide the screen support into the unit support 12 13 15 14 Mount screw covers paying attention to the marked numbers and locations 11 1 2 4 3 ...

Страница 4: ... it clicks into place Slide the connector cover in the back of the screen and fix the screw included with SPH EVO82DAB 18 19 Choose the desired distance for your screen and tighten the two screws on top included with the installation kit Insert the connector into the screen 17 16 Final product image 20 ...

Отзывы: