02
18
En
About the PQLS function
PQLS (Precision Quartz Lock System) is a digital audio
transfer control technology using the HDMI control
function. The player’s output signals are controlled from
the AV receiver to achieve high sound quality playback
using the receiver’s quartz oscillator. This eliminates the
influence of the jitter generated during signal transfer
which can adversely affect the sound quality.
• This player supports the functions below.
– The “PQLS 2ch Audio” function that is activated
when playing music CDs (CD-DAs)
– The “PQLS Multi Surround” function that is
activated when playing all discs (BDs, DVDs, etc.)
with linear PCM audio output
– The “PQLS Bitstream” function that is activated
when playing with bitstream audio output
• The various PQLS functions are activated when a
Pioneer AV receiver supporting the PQLS functions is
connected directly to the
HDMI OUT
terminal with an
HDMI cable and the player’s settings are set as
shown below (page 43).
Control: On
Precision Audio: AUTO
or
HDMI (PQLS)
(BDP-LX88
only)
• Also refer to the AV receiver’s operating instructions.
• See the Pioneer website for AV receivers supporting
the PQLS function.
Caution
• The PQLS function may stop working when the video
output resolution is switched. The PQLS function will
start working again once playback is stopped then
restarted.
• Turn on the power of the AV receiver connected to the
HDMI OUT
terminal, then start playback of the disc.
Connecting a TV
See
Connecting an AV receiver or amplifier
on page 19 to
connect an AV receiver or amplifier using an HDMI cable.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Connect a TV to the
HDMI OUT (MAIN)
terminal.
Caution
• Make sure to set
HDMI Mode
to
Dual
or
Single
(page 43).
RS-232C
DIGITAL AUDIO OUT
LAN
(10/100)
USB
HDMI OUT
OPTICAL
MAIN
SUB
COAXIAL
ZERO SIGNAL
TV
Match the direction of
the plug to the terminal
and insert straight.
To HDMI
input terminal
HDMI c
ab
le
(c
omm
er
ciall
y
avail
ab
le)
It is also possible to connect to an
AV receiver or amplifier using an
HDMI cable.
Direction of signal flow
BDP-LX88’s rear panel
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 18 ページ ２０１４年９月９日 火曜日 午前１０時１４分
