Pioneer BDP-440 Скачать руководство пользователя страница 17

Страница: 17 / 136

About Control Function with

HDMI

The functions work when a control function with HDMI-
compatible Pioneer Flat Screen TV or AV system (AV
receiver or amplifier, etc.) is connected to the player using
an HDMI cable.

Also refer to the operating instructions for the Flat Screen
TV and AV system (AV receiver or amplifier, etc.).



To use the control function with

HDMI

• The control function with HDMI operates when

control function with HDMI is set to On for all devices
connected with HDMI cables.

• Once the connections and the settings of all the

devices are finished, be sure to check that the player’s
picture is output to the Flat Screen TV. (Also check
after changing the connected devices and
reconnecting HDMI cables.) The control function with
HDMI may not operate properly if the player’s picture
is not properly output to the Flat Screen TV.

• Use High Speed HDMI

Cables when using the

control function with HDMI. The control function with
HDMI may not operate properly if other HDMI cables
are used.

• For some models, the control function with HDMI

may be referred to as “KURO LINK” or “HDMI
Control”.

• The control function with HDMI does not work with

devices of other brands, even if this player is
connected with an HDMI cable.



What the control function with

HDMI can do

• Outputting the optimum picture quality to a Flat

Screen TV compatible with the control function
with HDMI.

When the control function with HDMI is enabled,
video signals with the optimum picture quality for
control function with HDMI are output from the
player’s HDMI terminal.

• Operating the player with the Flat Screen TV’s

remote control.

Such player operations as starting and stopping
playback and displaying the menus can be performed
from the Flat Screen TV.

• The player’s playback picture is displayed on the

Flat Screen TV’s screen. (Auto-select function)

The input switches automatically on the Flat Screen
TV and AV system (AV receiver or amplifier, etc.) when
playback is started on the player or the Home Menu is
displayed. When the input is switched, the playback
picture, the Home Menu appears on the Flat Screen
TV.

• The power of the Flat Screen TV and the player

turns on and off automatically. (Simultaneous
power function)

When playback on the player is started or the Home
Menu is displayed, if the Flat Screen TV’s power was
off, its power turns on automatically. When the Flat
Screen TV’s power is turned off, the player’s power
automatically turns off.



Setting the HDMI Mode (Only for

BDP-53FD)

The BDP-53FD has two

HDMI OUT

(

MAIN

SUB

)

terminals. See page 15 for the details on these terminals.

The

HDMI Mode

needs to be selected before playback to

use the control function appropriately.

To make the setting, press

HOME MENU

to display the

Home Menu, select

Initial Setup



Audio Output



HDMI Mode

See the table below and set up the

HDMI Mode

according to your connection style.

Caution

• No video signal is output through the

SUB

terminal.

This terminal is only for audio signals.



Sound Retriever Link

About Sound Retriever Link

Sound Retriever Link is a sound quality correction control
technology that automatically adjusts the compressed
sound quality for the connected AV receiver using HDMI
control function.

Sound Retriever Link function allows you to enjoy higher
quality audio by setting the connected AV receiver’s
Sound Retriever function automatically.

Sound Retriever Link function on this player works
exclusively with the following situations.

• PC Audio Stream that is played by USB devices or via

network.

• The Pioneer AV receiver compatible with Sound

Retriever Link function is connected to this player
through an HDMI cable and the player’s setting is set
as shown below (page 43).

Control: On

• Also refer to the instructions of the AV receiver.

• See Pioneer website about AV receivers compatible

with Sound Retriever Link function.

HDMI
Mode

HDMI OUT MAIN